+++ /dev/null
-# Arquivo de configuração do BrWeather
-# Autor: LeandroNKZ
-# Acesse o site para maiores instruções:
-# http://brweatherproject.blogspot.com/
-
-# Pasta base
-DIRNAME="$HOME/apps/brweather/brweather"
-
-# Agora você pode escolher quais serviços de meteorologia utilizar no BrWeather: O nacional INPE ou o internacional Open Weather.
-# Recomenda-se que utilize os serviços do Open Weather, apenas se o serviço nacional não funcionar. Como no caso de você residir no exterior,
-# ou, no caso de o INPE não fornecer os dados completos para a usa cidade (como as condições atuais).
-# Nota: Por questões de compatibilidade e confiabilidade de informações, só é possível utilizar um tipo de serviço ao mesmo tempo.
-
-# No campo abaixo você ativa/desativa o modo Open Weather.
-# Escolha:
-# "0" = ATIVAR o serviço Nacinal INPE.
-# "1" = DESATIVAR o INPE e utilizar APENAS o serviço internacional Open Weather.
-OPEN="0"
-
-# Escolha o tempo de espera (em segundos) para a conexão.
-# Isso é útil para diminuir o tempo de resposta do programa.
-# Para conexões rápidas (banda larga), é recomendável deixar entre 5~10.
-# Já para conexões lentas, deixe entre 15~20 segundos.
-TIME="10"
-
-# Especifique o intervalo de funcionamento (em segundos) do programa.
-# O BrWeather só atualizará as previsões quando este invervalo for alcançado.
-# Como os sites que o BrWeather busca os dados costumam atualizar as previsões
-# a cada hora, um tempo entre 1800 (30min) e 3600 (1H) já está de bom tamanho.
-# Um invervalo menor do que 30min não é recomendado, uma vez que o BrWeather baixaria apenas
-# as mesmas previsões.
-TIMER="3600"
-
-# Especifique a codificação de caracteres.
-# Na dúvida, deixe o padrão (UTF-8).
-# Altere apenas se ocorrer problemas com os acentos das palavras.
-CODIGO="UTF-8"
-
-### Serviço Nacional ###
-# Para exibir informações mais precisas e, contar com várias opções,
-# o BrWeather utiliza o serviço de meteorologia do CPTEC/INPE (Instituto Nacional de Pesquisas Espaciais).
-# Nota: Preencha o campo abaixo, apenas se estiver utilizando o serviço nacional.
-# Se estiver utilizando apenas o Open Weather pule para o campo "Serviço Internacional".
-
-# CPTEC/INPE
-# Acesse o site:
-# http://www.cptec.inpe.br/cidades/
-# Digite apenas as primeiras letras de sua cidade e clique em "OK".
-# Ex.: guaru , são, rio, maca, floria, etc..
-# Nota: Deve-se colocar apenas as primeiras letras do nome da sua cidade.
-# Do contrário, se você colocar o nome inteiro, a tela exibirá diretamente as previsões,
-# porém, sem o código numérico (necessário para o funcionamento do programa).
-# Ao clicar em ok, aparecerá uma lista de cidades que começa com as letras especificadas.
-# Selecione e clique em sua cidade.
-# Na barra de URL, constará um código numérico.
-# Ex.: http://www.cptec.inpe.br/cidades/tempo/4901
-# Anote o número e coloque no campo abaixo, no lugar de "2247".
-CPTEC_INPE="244"
-
-### Observação importante: ###
-# Se a sua cidade constar no site do INPE, mas não possuir a previsão completa (com dados como condições atuais, temperatura atual, nível de umidade atual, etc), você deve utilizar o BrWeather no modo Open.
-
-### Serviço Internacional ###
-# Importante: Não é necessário preencher estes campos se você utiliza somente o serviço nacional.
-# Acesse o site: http://openweathermap.org
-# Procure pela sua cidade no mapa, e clique no ícone de previsão da mesma
-# Assim que abrir a página com a previsão completa, veja que na barra de URL constará um código númérico.
-# Ex.: http://openweathermap.org/city/3461786
-# Anote o número e adicione no campo abaixo, no lugar de "3461786".
-OPEN_ID="3448439"
+++ /dev/null
-#
-# conky configuration for weather information
-#
-
-# set to yes if you want conky to be forked in the background
-background yes
-
-# X font when Xft is disabled, you can pick one with program xfontsel
-#font 5x7
-#font 6x10
-#font 7x13
-#font 8x13
-#font 9x15
-#font *mintsmild.se*
-#font -*-*-*-*-*-*-34-*-*-*-*-*-*-*
-
-# Use Xft?
-#use_xft no
-
-# Xft font when Xft is enabled
-xftfont courier-12
-
-# Text alpha when using Xft
-#xftalpha 0.8
-
-# mail spool
-#mail_spool $MAIL
-
-# Update interval in seconds
-update_interval 5.0
-
-# Create own window instead of using desktop (required in nautilus)
-own_window yes
-own_window_type override
-own_window_transparent yes
-own_window_hints undecorate,sticky,skip_taskbar,skip_pager,below
-
-# Use double buffering (reduces flicker, may not work for everyone)
-double_buffer yes
-
-# Minimum size of text area
-#minimum_size 280 5
-
-# Draw shades?
-#draw_shades yes
-
-# Draw outlines?
-#draw_outline no
-
-# Draw borders around text
-#draw_borders yes
-
-# Stippled borders?
-#stippled_borders 8
-
-# border margins
-#border_margin 4
-
-# border width
-#border_width 1
-
-# Default colors and also border colors
-#default_color white
-#default_shade_color black
-#default_outline_color black
-
-# Text alignment, other possible values are commented
-alignment top_left
-#alignment top_right
-#alignment bottom_left
-#alignment bottom_right
-
-# Gap between borders of screen and text
-#gap_x 30
-#gap_y 25
-gap_x 20
-gap_y 30
-
-# Subtract file system buffers from used memory?
-no_buffers yes
-
-# set to yes if you want all text to be in uppercase
-uppercase no
-
-# increase buffer size
-text_buffer_size 400
-
-# stuff after 'TEXT' will be formatted on screen
-
-TEXT
-Weather
-$stippled_hr
-${execi 3600 weather-query weather}
-
-
-
-${execpi 3600 weather-query brweather --imagem4=C1 -p 10,100 -s 60x60}
-${execpi 3600 weather-query brweather --imagem4=C2 -p 110,100 -s 60x60}
-${execpi 3600 weather-query brweather --imagem4=C3 -p 210,100 -s 60x60}
-
-
-
-${execi 3600 weather-query brweather --option=Day1 | sed -e 's/á/a/g'}: ${execi 3600 weather-query brweather --option=LT1 | sed -e 's/°/C/g'}/${execi 3600 weather-query brweather --option=HT1 | sed -e 's/°/C/g'} ${goto 100} ${execi 3600 weather-query brweather --option=Day2 | sed -e 's/á/a/g'}: ${execi 3600 weather-query brweather --option=LT2 | sed -e 's/°/C/g'}/${execi 3600 weather-query brweather --option=HT2 | sed -e 's/°/C/g'} ${goto 200} ${execi 3600 weather-query brweather --option=Day3 | sed -e 's/á/a/g'}: ${execi 3600 weather-query brweather --option=LT3 | sed -e 's/°/C/g'}/${execi 3600 weather-query brweather --option=HT3 | sed -e 's/°/C/g'}
-
-
-# segunda
-${voffset -35}${goto 345}${execpi 3600 weather-query brweather --option=LUA2D}
-# terceira
-${voffset -10}${goto 425}${execpi 3600 weather-query brweather --option=LUA3D}
-# quarta
-${voffset -10}${goto 505}${execpi 3600 weather-query brweather --option=LUA4D}
-# Segunda
-${voffset 0}${goto 345}${execpi 3600 weather-query brweather --option=LUA2T}
-# terceira
-${voffset -10}${goto 425}${execpi 3600 weather-query brweather --option=LUA3T}
-# quarta
-${voffset -10}${goto 505}${execpi 3600 weather-query brweather --option=LUA4T}
-# Imagem das luas
-# Hoje
-${execpi 3600 weather-query brweather --option=LUA1I -s 75x75 -p 405,35}
-# Segunda lua
-${execpi 3600 weather-query brweather --option=LUA2I -s 30x30 -p 350,115}
-# Terceira lua
-${execpi 3600 weather-query brweather --option=LUA3I -s 30x30 -p 420,115}
-# Quarta lua
-${execpi 3600 weather-query brweather --option=LUA4I -s 30x30 -p 500,115}
-
-${voffset -165}${goto 490}${execpi 3600 weather-query brweather --option=LUA1T}
-
-
-
-
-
-
-
-
-
-
-
+++ /dev/null
-#
-# conky configuration
-#
-# Resources:
-# http://dancingpenguinsoflight.com/2009/01/gorgeous-and-useful-information-configuring-conky/
-# http://cristalinux.blogspot.com.br/2011/03/some-conky-favorites-of-mine_04.html
-# http://desktopspotting.com/26/best-conky-configs-for-linux-desktop/
-# http://www.linuxandlife.com/2011/09/beautiful-conky-linux.html
-
-# set to yes if you want conky to be forked in the background
-background yes
-
-# X font when Xft is disabled, you can pick one with program xfontsel
-#font 5x7
-#font 6x10
-#font 7x13
-#font 8x13
-#font 9x15
-#font *mintsmild.se*
-#font -*-*-*-*-*-*-34-*-*-*-*-*-*-*
-
-# Use Xft?
-#use_xft no
-
-# Xft font when Xft is enabled
-xftfont courier-12
-
-# Text alpha when using Xft
-#xftalpha 0.8
-
-# mail spool
-#mail_spool $MAIL
-
-# Update interval in seconds
-update_interval 5.0
-
-# Create own window instead of using desktop (required in nautilus)
-own_window no
-
-# Use double buffering (reduces flicker, may not work for everyone)
-double_buffer yes
-
-# Minimum size of text area
-#minimum_size 280 5
-
-# Draw shades?
-#draw_shades yes
-
-# Draw outlines?
-#draw_outline no
-
-# Draw borders around text
-#draw_borders yes
-
-# Stippled borders?
-#stippled_borders 8
-
-# border margins
-#border_margin 4
-
-# border width
-#border_width 1
-
-# Default colors and also border colors
-#default_color white
-#default_shade_color black
-#default_outline_color black
-
-# Text alignment, other possible values are commented
-#alignment top_left
-alignment top_right
-#alignment bottom_left
-#alignment bottom_right
-
-# Gap between borders of screen and text
-#gap_x 30
-#gap_y 25
-gap_x 20
-gap_y 30
-
-# Subtract file system buffers from used memory?
-no_buffers yes
-
-# set to yes if you want all text to be in uppercase
-uppercase no
-
-# boinc (seti) dir
-#seti_dir /usr/local/seti
-
-# Possible variables to be used:
-#
-# Variable Arguments Description
-# acpiacadapter ACPI ac adapter state.
-# acpifan ACPI fan state
-# acpitemp ACPI temperature.
-# adt746xcpu CPU temperature from therm_adt746x
-# adt746xfan Fan speed from therm_adt746x
-# battery (num) Remaining capasity in ACPI or APM
-# battery. ACPI battery number can be
-# given as argument (default is BAT0).
-# buffers Amount of memory buffered
-# cached Amount of memory cached
-# color (color) Change drawing color to color
-# cpu CPU usage in percents
-# cpubar (height) Bar that shows CPU usage, height is
-# bar's height in pixels
-# downspeed net Download speed in kilobytes
-# downspeedf net Download speed in kilobytes with one
-# decimal
-# exec shell command Executes a shell command and displays
-# the output in torsmo. warning: this
-# takes a lot more resources than other
-# variables. I'd recommend coding wanted
-# behaviour in C and posting a patch :-).
-# execi interval, shell Same as exec but with specific interval.
-# command Interval can't be less than
-# update_interval in configuration.
-# fs_bar (height), (fs) Bar that shows how much space is used on
-# a file system. height is the height in
-# pixels. fs is any file on that file
-# system.
-# fs_free (fs) Free space on a file system available
-# for users.
-# fs_free_perc (fs) Free percentage of space on a file
-# system available for users.
-# fs_size (fs) File system size
-# fs_used (fs) File system used space
-# hr (height) Horizontal line, height is the height in
-# pixels
-# i2c (dev), type, n I2C sensor from sysfs (Linux 2.6). dev
-# may be omitted if you have only one I2C
-# device. type is either in (or vol)
-# meaning voltage, fan meaning fan or temp
-# meaning temperature. n is number of the
-# sensor. See /sys/bus/i2c/devices/ on
-# your local computer.
-# kernel Kernel version
-# loadavg (1), (2), (3) System load average, 1 is for past 1
-# minute, 2 for past 5 minutes and 3 for
-# past 15 minutes.
-# machine Machine, i686 for example
-# mails Mail count in mail spool. You can use
-# program like fetchmail to get mails from
-# some server using your favourite
-# protocol. See also new_mails.
-# mem Amount of memory in use
-# membar (height) Bar that shows amount of memory in use
-# memmax Total amount of memory
-# memperc Percentage of memory in use
-# new_mails Unread mail count in mail spool.
-# nodename Hostname
-# outlinecolor (color) Change outline color
-# pre_exec shell command Executes a shell command one time before
-# torsmo displays anything and puts output
-# as text.
-# processes Total processes (sleeping and running)
-# running_processes Running processes (not sleeping),
-# requires Linux 2.6
-# shadecolor (color) Change shading color
-# stippled_hr (space), Stippled (dashed) horizontal line
-# (height)
-# swapbar (height) Bar that shows amount of swap in use
-# swap Amount of swap in use
-# swapmax Total amount of swap
-# swapperc Percentage of swap in use
-# sysname System name, Linux for example
-# time (format) Local time, see man strftime to get more
-# information about format
-# totaldown net Total download, overflows at 4 GB on
-# Linux with 32-bit arch and there doesn't
-# seem to be a way to know how many times
-# it has already done that before torsmo
-# has started.
-# totalup net Total upload, this one too, may overflow
-# updates Number of updates (for debugging)
-# upspeed net Upload speed in kilobytes
-# upspeedf net Upload speed in kilobytes with one
-# decimal
-# uptime Uptime
-# uptime_short Uptime in a shorter format
-#
-# seti_prog Seti@home current progress
-# seti_progbar (height) Seti@home current progress bar
-# seti_credit Seti@hoome total user credit
-
-#seti_progbar
-
-# variable is given either in format $variable or in ${variable}. Latter
-# allows characters right after the variable and must be used in network
-# stuff because of an argument
-
-# stuff after 'TEXT' will be formatted on screen
-
-#${color grey}Mails: ${color}$mails${color grey} New: ${color}$new_mails${color grey}
-#${color grey}Temperatures:
-# CPU:$color ${i2c temp 1}°C${color grey} - MB:$color ${i2c temp 2}°C
-
-# feed parser
-# $color${execi 900 ~/.conky/scripts/feed_parser/feed_parser.sh}
-
-TEXT
-$nodename - $sysname on $machine
-$stippled_hr
-${execpi 3600 xconky battery }
-${color grey}Uptime$color $uptime
-${color grey}Swap Usage:$color $swap/$swapmax - $swapperc% ${swapbar 6}
-${color grey}RAM Usage:$color $mem/$memmax - $memperc% ${membar 6}
-${color grey}${memgraph 000000 7f8ed3 -t}
-${color grey}CPU Usage:$color $cpu% ${cpubar 6}
-${color grey}CPU Frequency:$color $freq Hz
-${color grey}${cpugraph 000000 7f8ed3 -t}
-${color grey}Load average:$color $loadavg
-${color grey}${loadgraph 000000 7f8ed3}
-${color grey}Disk I/O:$color $diskio
-${color grey}${diskiograph 000000 7f8ed3}
-$color$stippled_hr
-${color grey}Networking:
-${if_up eth0}${color grey} eth0: Up:$color ${upspeed eth0} k/s${color grey} - Down:$color ${downspeed eth0} k/s
-${color grey}${downspeedgraph eth0 32,150 000000 7f8ed3 -l} $alignr${color grey}${upspeedgraph eth0 32,150 000000 7f8ed3 -l}${endif}
-${if_up wlan0}${color grey} wlan0: Up:$color ${upspeed wlan0} k/s${color grey} - Down:$color ${downspeed wlan0} k/s
-${color grey}${downspeedgraph wlan0 32,150 000000 7f8ed3 -l} $alignr${color grey}${upspeedgraph wlan0 32,150 000000 7f8ed3 -l}${endif}
-${if_up ppp0}${color grey} ppp0: Up:$color ${upspeed ppp0} k/s${color grey} - Down:$color ${downspeed ppp0} k/s
-${color grey}${downspeedgraph ppp0 32,150 000000 7f8ed3 -l} $alignr${color grey}${upspeedgraph ppp0 32,150 000000 7f8ed3 -l}${endif}
-$color$stippled_hr
-
-${color grey}File systems:
- / $color${fs_free /}/${fs_size /} ${fs_bar 6 /}
-# /home $color${fs_free /home}/${fs_size /home} ${fs_bar 6 /home}
- /var $color${fs_free /var}/${fs_size /var} ${fs_bar 6 /var}
-# /var/vservers $color${fs_free /var/vservers}/${fs_size /var/vservers} ${fs_bar 6 /var/vservers}
- ${execpi 3600 xconky fs_home }
-#${color grey}syslog${hr 2}${color}
-#${execi 30 tail -n3 /var/log/daemon | fold -w50}
-#${color grey}Fortune${hr 2}${color}
-#${execi 240 fortune -s | fold -w50}
-$color$stippled_hr
-
-${color grey}Processes:$color $processes ${color grey}Running:$color $running_processes
-${color grey}Processes by mem usage${hr 2}${color}
-${color} Name ${alignr} PID CPU% MEM%
-${color} ${top_mem name 1} ${alignr} ${top_mem pid 1} ${top_mem cpu 1} ${top_mem mem 1}
-${color} ${top_mem name 2} ${alignr} ${top_mem pid 2} ${top_mem cpu 2} ${top_mem mem 2}
- ${top_mem name 3} ${alignr} ${top_mem pid 3} ${top_mem cpu 3} ${top_mem mem 3}
- ${top_mem name 4} ${alignr} ${top_mem pid 4} ${top_mem cpu 4} ${top_mem mem 4}
-
projects / rhatto / dotfiles.git / commitdiff