- Trying to create a list with the same name of an existing list

would cause the existing list to be removed. Fixed.
- User:group would always be set to nobody:nobody. Fixed.
- Not all global variables were being unset after execution. Fixed.
- Minor bugs fixed on the list creation routine.

diff --git a/CHANGELOG b/CHANGELOG
index fbff484f170dfa84d1b873ed285636fe982623a5..ecfc250af13588803293fa8bb3e4b1edc04168d4 100755 (executable)
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -1,6 +1,27 @@
 Firma CHANGELOG
 ---------------
 
+29/07/2007 - 0.3-cvs (rev 1.168) - luis
+
+  - firma would always exit successfully (exit code = 0). Fixed.
+
+  - Message signature checking was being completely skipped. Fixed.
+
+  - Passphrase check for sequentially repeated characters wasn't
+    working. Fixed.
+
+  - Trying to create a list with the same name (same homedir path,
+    actually) of an existing list would cause this list to be
+    removed. Fixed.
+
+  - firma's user and group would always be set to nobody:nobody,
+    disregarding what was entered at firma.conf. Fixed.
+
+  - Not all global variables were being unset at the end of firma's
+    execution. Fixed.
+
+  - Better list creation routine. Minor bugs fixed.
+
 31/01/2007 - 0.3-cvs (rev 1.152) - luis
 
   - Removed firma dependecy on bc, cat and tac.
@@ -581,7 +602,7 @@ Lots of stuff for today :)
 
 07/05/2005 - 0.3-cvs (rev 1.13) - rhatto
 
-  - Firma now uses sendmail or any smtp wrapper directly:
+  - firma now uses sendmail or any smtp wrapper directly:
     - Specify your smtp wrapper through MAIL var, e.g.:
       MAIL=/usr/sbin/sendmail
       MAIL=/usr/bin/ssmtp
@@ -662,7 +683,7 @@ Lots of stuff for today :)
     about it is now sent separately for the sender and the list
     administrators.
   - Other minor fixes and improvements.
-  - fix LISTNAME and LISTADMIN case sensitiveness
+  - Fix LISTNAME and LISTADMIN case sensitiveness.
 
 18/04/2005 - v0.2.1 - luis
 

diff --git a/README b/README
index a13634733043f91a4eb456d3bd2cb32cb622c072..09b2091c1cc7d1dddd002648eea17f36416dc518 100755 (executable)
--- a/README
+++ b/README
@@ -160,15 +160,15 @@ Setup
 
      As optional parameters, you can also set
 
-       USER= user that runs firma (usually the same as your MTA user);
-             defaults to "nobody"; you can also specify this parameter
-             in each mailing list config file if you plan to have one
-             user per mailing list
-
-       GROUP= group that runs firma (usually the same as your MTA group);
-              defaults to "nobody"; you can also specify this parameter
-              in each mailing list config file if you plan to have one
-              group per mailing list
+       FIRMA_USER= user that runs firma (usually the same as your MTA user);
+                   defaults to "nobody"; you can also specify this parameter
+                   in each mailing list config file if you plan to have one
+                   user per mailing list
+
+       FIRMA_GROUP= group that runs firma (usually the same as your MTA group);
+                    defaults to "nobody"; you can also specify this parameter
+                    in each mailing list config file if you plan to have one
+                    group per mailing list
 
        LOG_TO_SYSLOG= set to '1' to log errors and warnings to syslog, else firma
                       will print errors to STDERR

diff --git a/firma b/firma
index e2f2e1c05d77bda0deee0bbfea2efd448654d95b..630c40e4114e692e9e3b3a107537ad02475df077 100755 (executable)
--- a/firma
+++ b/firma
@@ -920,7 +920,8 @@ function NewList {
           echo "Deleting folder $LIST_HOMEDIR..."
           rm -rf $LIST_HOMEDIR
           echo "List creation aborted."
-          exit 1
+          return_code=1
+          break
         elif CheckValidEmail $LIST_ADDRESS; then
           break
         else
@@ -936,7 +937,8 @@ function NewList {
             echo "Deleting folder $LIST_HOMEDIR..."
             rm -rf $LIST_HOMEDIR
             echo "List creation aborted."
-            exit 1
+            return_code=1
+            break
           else
             for admin in $LIST_ADMIN; do
               if ! CheckValidEmail $admin; then
@@ -945,6 +947,7 @@ function NewList {
             done
             if [[ -n "$invalid" ]]; then
               echo "  Invalid email address: $invalid."
+              invalid=""
             else
               break
             fi
@@ -989,7 +992,8 @@ function NewList {
             echo "Deleting folder $LIST_HOMEDIR..."
             rm -rf $LIST_HOMEDIR
             echo "List creation aborted."
-            exit 1
+            return_code=1
+            break
           elif [[ "$answer" == "1" || "$answer" == "1024" ]]; then
             KEY_SIZE="1024"
             break
@@ -1026,7 +1030,8 @@ function NewList {
             echo "Deleting folder $LIST_HOMEDIR..."
             rm -rf $LIST_HOMEDIR
             echo "List creation aborted."
-            exit 1
+            return_code=1
+            break
           elif [[ -z "$(echo $digits_only | sed -e 's/[0-9]//g')" || -n "$last_char" ]]; then
             break
           else
@@ -1123,9 +1128,6 @@ EOF
           echo "Your list was created. Now check its configuration at $LIST_CONFIG_FILE."
           echo "To see a list of optional config parameters, type firma --help config."
         fi
-      else
-        echo "Cannot create list $LIST_HOMEDIR: Installation aborted"
-        return_code=1
       fi
     else
       echo "Could not create list homedir $LIST_HOMEDIR."
@@ -1134,9 +1136,7 @@ EOF
   fi
 
   # list creation should be atomic
-  if [[ "$return_code" == "1" ]]; then
-    rm -rf $LIST_HOMEDIR
-  else
+  if [[ "$return_code" == "0" ]]; then
     echo "List creation complete."
   fi
 
@@ -2020,17 +2020,17 @@ function SourceFirmaConfig {
 
   [[ "$1" == "help" ]] && echo -e "\nOptional global firma config parameters\n"
 
-  [[ "$1" == "help" ]] && echo -e "\tUSER= user that runs firma (usually the same as your MTA user);
+  [[ "$1" == "help" ]] && echo -e "\tFIRMA_USER= user that runs firma (usually the same as your MTA user);
 \t      defaults to "nobody"; you can also specify this parameter
 \t      in each mailing list config file if you plan to have one
 \t      user per mailing list." || \
-  FIRMA_USER="$(EvalConfigParameter $FIRMA_CONFIG_FILE USER)"
+  FIRMA_USER="$(EvalConfigParameter $FIRMA_CONFIG_FILE FIRMA_USER)"
 
-  [[ "$1" == "help" ]] && echo -e "\tGROUP= group that runs firma (usually the same as your MTA group);
+  [[ "$1" == "help" ]] && echo -e "\tFIRMA_GROUP= group that runs firma (usually the same as your MTA group);
 \t       defaults to "nobody"; you can also specify this parameter
 \t       in each mailing list config file if you plan to have one
 \t       group per mailing list." || \
-  FIRMA_GROUP="$(EvalConfigParameter $FIRMA_CONFIG_FILE GROUP)"
+  FIRMA_GROUP="$(EvalConfigParameter $FIRMA_CONFIG_FILE FIRMA_GROUP)"
 
   [[ "$1" == "help" ]] && echo -e "\tLOG_TO_SYSLOG= set to "1" to log errors and warnings to syslog, else firma
 \t               will print errors to STDERR." || \
@@ -2086,18 +2086,18 @@ function SourceListConfig {
   [[ "$1" == "help" ]] && echo -e "\tLIST_HOMEDIR= list's GnuPG homedir, where the list's keyrings are located." || \
   LIST_HOMEDIR="$(EvalConfigParameter $LIST_CONFIG_FILE LIST_HOMEDIR)"
 
-  [[ "$1" == "help" ]] && echo -e "\tUSER= user that runs firma (usually the same as your MTA user);
+  [[ "$1" == "help" ]] && echo -e "\tFIRMA_USER= user that runs firma (usually the same as your MTA user);
 \t      defaults to "nobody"; you can also specify this parameter
 \t      in each mailing list config file if you plan to have one
 \t      user per mailing list." || \
-  firma_user="$(EvalConfigParameter $LIST_CONFIG_FILE USER)"
+  firma_user="$(EvalConfigParameter $LIST_CONFIG_FILE FIRMA_USER)"
   [[ -n "$firma_user" ]] && FIRMA_USER="$firma_user"
 
-  [[ "$1" == "help" ]] && echo -e "\tGROUP= group that runs firma (usually the same as your MTA group);
+  [[ "$1" == "help" ]] && echo -e "\tFIRMA_GROUP= group that runs firma (usually the same as your MTA group);
 \t       defaults to "nobody"; you can also specify this parameter
 \t       in each mailing list config file if you plan to have one
 \t       group per mailing list." || \
-  firma_group="$(EvalConfigParameter $LIST_CONFIG_FILE GROUP)"
+  firma_group="$(EvalConfigParameter $LIST_CONFIG_FILE FIRMA_GROUP)"
   [[ -n "$firma_group" ]] && FIRMA_GROUP="$firma_group"
 
   [[ "$1" == "help" ]] && echo -e "\tPASSPHRASE= passphrase for the list's private keyring\n
@@ -2286,8 +2286,8 @@ function ReplayProtectionCheck {
 #-------------------------------------------------------------
 
 # path to firma.conf and firma version
-FIRMA_CONFIG_FILE="/usr/local/etc/firma.conf"
-REPLAY_DEFAULT_FILE="/var/log/firma/replay.db"
+FIRMA_CONFIG_FILE="/home/luis/tmp/firma/testing_release/firma.conf"
+REPLAY_DEFAULT_FILE="/home/luis/tmp/firma/testing_release/replay"
 VERSION="0.3"
 
 # set environmental variables and options
@@ -2312,10 +2312,6 @@ GLOBAL_VARS="
   DECRYPTED_MESSAGE
   MESSAGE_HEADERS MESSAGE_BODY
   MESSAGE
-  FUNCTION FUNCTIONS
-  GLOBAL_VARS VAR
-  USER
-  GROUP
   BASENAME
   FIRMA_USER
   FIRMA_GROUP
@@ -2327,7 +2323,9 @@ GLOBAL_VARS="
   REPLAY_FILE
   REPLAY_DEFAULT_FILE
   REPLAY_PROTECTION
-  REPLAY_COUNT"
+  REPLAY_COUNT
+  FUNCTION FUNCTIONS
+  GLOBAL_VARS"
 
 FUNCTIONS="
   Usage