# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for kedpm, by Silvio Rhatto
-# requires: pycrypto
+# requires: pycrypto
# tested: kedpm-0.4.0
#
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
elif [ "$ARCH" = "x86_64" ]; then
- SLKCFLAGS="-O2"
+ SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
wget "$URL" -O "$SRC_DIR/$SRC" || exit $ERROR_WGET
fi
-
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC=`ls -l | awk '/^d/ { print $8 }'`
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Build and install package
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
kedpm:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
EODESC
# Add a post-installation script (doinst.sh)
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EOSCRIPT > "$PKG/install/doinst.sh"
config() {
NEW="\$1"
OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+ OLD="\$(dirname \$NEW)/\$(basename \$OLD .sample)"
+ OLD="\$(dirname \$NEW)/\$(basename \$OLD .dist)"
+
# If there's no config file by that name, mv it over:
if [ ! -r \$OLD ]; then
mv \$NEW \$OLD
config etc/rc.d/rc.syslog-ng.new ; config etc/syslog-ng.conf.new
EOSCRIPT
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
EODESC
# Add a post-installation script (doinst.sh)
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EOSCRIPT > "$PKG/install/doinst.sh"
config() {
NEW="\$1"
config /etc/backupninja.conf.new
EOSCRIPT
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for duplicity, by Silvio Rhatto
# requires: librsync
elif [ "$ARCH" = "x86_64" ]; then
SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Build and install package
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
duplicity:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
gibak:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
metastore:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for rdiff-backup, by Silvio Rhatto
# requires: librsync
elif [ "$ARCH" = "x86_64" ]; then
SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Build and install package
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
rdiff-backup: symlinks, device files, permissions, ownership, etc.
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
tahoe:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for k9copy, by Rudson R. Alves
# requires: ffmpeg vamps qt kdelibs libdvdread libdvdcss
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
elif [ "$ARCH" = "x86_64" ]; then
- SLKCFLAGS="-O2"
+ SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
k9copy:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for babytrans, by Rudson R. Alves
# requires: gtk+
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
elif [ "$ARCH" = "x86_64" ]; then
- SLKCFLAGS="-O2"
+ SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
babytrans: - Engto***.dic (with *** depending on the language)
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for xmltoman, by Rudson R. Alves
# requires: perl
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
elif [ "$ARCH" = "x86_64" ]; then
- SLKCFLAGS="-O2"
+ SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Patch source
patch -Np1 < "$CWD/$patch" || exit $ERROR_PATCH
elif [ -f "$CWD/patches/$patch" ]; then
patch -Np1 < "$CWD/patches/$patch" || exit $ERROR_PATCH
+ elif [ -f "$CWD/$patch.gz" ]; then
+ gzip -dc "$CWD/$patch.gz" | patch -Np1 || exit $ERROR_PATCH
+ elif [ -f "$CWD/patches/$patch.gz" ]; then
+ gzip -dc "$CWD/patches/$patch.gz" | patch -Np1 || exit $ERROR_PATCH
fi
done
+if echo [[PATCH URLS]] | grep -q -v "PATCH URLS"; then
+ for patch_url in [[PATCH URLS]]; do
+ patch="`basename $patch_url`"
+ if [ ! -s "$SRC_DIR/$patch" ]; then
+ wget "$patch_url" -O "$SRC_DIR/$patch" || exit $ERROR_WGET
+ fi
+ if [ "`basename $patch .gz`" != "$patch" ]; then
+ gzip -dc $SRC_DIR/$patch | patch -Np1 || exit $ERROR_PATCH
+ elif [ "`basename $patch .bz2`" != "$patch" ]; then
+ bzip2 -dc $SRC_DIR/$patch | patch -Np1 || exit $ERROR_PATCH
+ else
+ patch -Np1 < "$SRC_DIR/$patch" || exit $ERROR_PATCH
+ fi
+ done
+fi
+
# Compile
make PREFIX=$PREFIX || exit $ERROR_MAKE
)
# Install documentation
-DOCS="NEWS TODO README AUTHORS INSTALL ChangeLog MAINTAINERS COPYING readme.*"
+DOCS="NEWS TODO README AUTHORS INSTALL ChangeLog MAINTAINERS COPYING LICENSE SIGNATURE readme.*"
mkdir -p "$PKG/usr/doc/$PKG_NAME-$PKG_VERSION" || exit $ERROR_MKDIR
for doc in $DOCS; do
if [ -f "$doc" ]; then
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
xmltoman:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for kile, by Rudson R. Alves
# requires: kdelibs
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
elif [ "$ARCH" = "x86_64" ]; then
- SLKCFLAGS="-O2"
+ SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
kile:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for wine-doors, by Rudson R. Alves
# requires: python cairo libxml2 glade
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
elif [ "$ARCH" = "x86_64" ]; then
- SLKCFLAGS="-O2"
+ SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Install winedoors in $DESTDIR
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
wine-doors: Cedega, cvscedega and Crossover Office.
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for rssh-chroot, by Silvio Rhatto
# requires: rssh
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
EODESC
# Add a post-installation script (doinst.sh)
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EOSCRIPT > "$PKG/install/doinst.sh"
config() {
NEW="\$1"
OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+ OLD="\$(dirname \$NEW)/\$(basename \$OLD .sample)"
+ OLD="\$(dirname \$NEW)/\$(basename \$OLD .dist)"
+
# If there's no config file by that name, mv it over:
if [ ! -r \$OLD ]; then
mv \$NEW \$OLD
if ! grep -qe "^\$GROUP:" etc/group; then
echo Creating group \$GROUP...
chroot . /usr/sbin/groupadd \$GROUP
- fi
+ fi
}
mkuser() {
( echo Please check if $CHROOT_BASE/dev/null was correctly created )
EOSCRIPT
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
enchant:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
gtkspell:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for glibmm, by Silvio Rhatto
# requires: libsigc++ glib
SRC_NAME="glibmm"
PKG_NAME="glibmm"
ARCH=${ARCH:=i486}
-SRC_VERSION=${VERSION:=2.14.2}
+SRC_VERSION=${VERSION:=2.12.10}
PKG_VERSION="$(echo "$SRC_VERSION" | tr '[[:blank:]-]' '_')"
BUILD=${BUILD:=1rha}
SRC_DIR=${SRC_DIR:=$CWD}/$PKG_NAME
elif [ "$ARCH" = "x86_64" ]; then
SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Dowload source if necessary
SRC="$SRC_NAME-$VERSION.tar.bz2"
-URL="http://ftp.acc.umu.se/pub/GNOME/sources/glibmm/2.14/$SRC"
+URL="http://ftp.acc.umu.se/pub/GNOME/sources/glibmm/2.12/$SRC"
if [ ! -s "$SRC_DIR/$SRC" ] || ! bunzip2 -t "$SRC_DIR/$SRC" 2> /dev/null; then
wget "$URL" -O "$SRC_DIR/$SRC" || exit $ERROR_WGET
fi
-MD5SUM_SRC="$(md5sum "$SRC_DIR/$SRC" | cut -d " " -f 1)"
-MD5SUM_URL=58b4fdc97738795a19b1f5ad37f186b4
-
-[ "$MD5SUM_SRC" == "$MD5SUM_URL" ] || exit $ERROR_MD5
-
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
)
# Install documentation
-DOCS="NEWS TODO README AUTHORS INSTALL ChangeLog MAINTAINERS COPYING readme.*"
+DOCS="NEWS TODO README AUTHORS INSTALL ChangeLog MAINTAINERS COPYING LICENSE SIGNATURE readme.*"
mkdir -p "$PKG/usr/doc/$PKG_NAME-$PKG_VERSION" || exit $ERROR_MKDIR
for doc in $DOCS; do
if [ -f "$doc" ]; then
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
glibmm:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for gtkmm, by Silvio Rhatto
# requires: cairomm
SRC_NAME="gtkmm"
PKG_NAME="gtkmm"
ARCH=${ARCH:=i486}
-SRC_VERSION=${VERSION:=2.12.7}
+SRC_VERSION=${VERSION:=2.8.12}
PKG_VERSION="$(echo "$SRC_VERSION" | tr '[[:blank:]-]' '_')"
BUILD=${BUILD:=1rha}
SRC_DIR=${SRC_DIR:=$CWD}/$PKG_NAME
elif [ "$ARCH" = "x86_64" ]; then
SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Dowload source if necessary
SRC="$SRC_NAME-$VERSION.tar.bz2"
-URL="http://ftp.gnome.org/pub/GNOME/sources/gtkmm/2.12/$SRC"
+URL="http://ftp.gnome.org/pub/GNOME/sources/gtkmm/2.8/$SRC"
if [ ! -s "$SRC_DIR/$SRC" ] || ! bunzip2 -t "$SRC_DIR/$SRC" 2> /dev/null; then
wget "$URL" -O "$SRC_DIR/$SRC" || exit $ERROR_WGET
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
gtkmm:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# Dependency list to gtkmm
#
# dependency [condition] [version]]
-cairomm
-glibmm
+cairomm glibmm
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for mono, by Rudson R. Alves
# requires: glib2 glibc-solibs zlib
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
elif [ "$ARCH" = "x86_64" ]; then
- SLKCFLAGS="-O2"
+ SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
mono:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
DirectFB-extra:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
exml:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for gdk-pixbuf, by Rudson R. Alves
# requires: glib glibc-solibs gtk+ libX11 libXau libXdmcp libXext libxcb
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
elif [ "$ARCH" = "x86_64" ]; then
- SLKCFLAGS="-O2"
+ SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
gdk-pixbuf:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for libdaemon, by Rudson R. Alves
# requires: glibc-solibs
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
elif [ "$ARCH" = "x86_64" ]; then
- SLKCFLAGS="-O2"
+ SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
libdaemon:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
libgweather:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
perl-archive-tar:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
perl-array-compare:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
perl-html-stripscripts-parser:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
perl-html-stripscripts:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
perl-inline:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
perl-io-compress-zlib:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
perl-io-socket-ssl:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
perl-io-zlib:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
perl-libwww-perl:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
perl-mail-clamav:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
perl-mail-spamassassin:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
perl-mime-tools:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
perl-net-dns:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
perl-net-ip:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
perl-net-ssleay:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
perl-template-toolkit:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
perl-xml-libxml:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
perl-xml-sax:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for dbus-python, by Rudson R. Alves
# requires: dbus dbus-glib glib2 glibc-solibs python
-# tested: dbus-python-0.82.3, 0.82.4
+# tested: dbus-python-0.82.3
#
# Look for slackbuildrc
SRC_NAME="dbus-python"
PKG_NAME="dbus-python"
ARCH=${ARCH:=i486}
-SRC_VERSION=${VERSION:=0.82.4}
+SRC_VERSION=${VERSION:=0.82.3}
PKG_VERSION="$(echo "$SRC_VERSION" | tr '[[:blank:]-]' '_')"
BUILD=${BUILD:=1rra}
SRC_DIR=${SRC_DIR:=$CWD}/$PKG_NAME
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
elif [ "$ARCH" = "x86_64" ]; then
- SLKCFLAGS="-O2"
+ SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
dbus-python:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
epsilon:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
cd "$PKG_SRC"
# Build and install package
-python setup.py build install --root=$PKG
+python setup.py build install --root=$PKG || exit $ERROR_INSTALL
# Strip binaries
( cd "$PKG"
Genshi:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# Adjust docdir
sed -i "s,share/doc/${PKG_NAME},doc/${PKG_NAME}-${PKG_VERSION},g" setup.py
-python setup.py install --root=$PKG
+python setup.py install --root=$PKG || exit $ERROR_INSTALL
# Install documentation
DOCS="AUTHORS COPYING ChangeLog MANIFEST.in NEWS PKG-INFO README"
kiwi:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
MySQL-python:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
Nevow:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
numpy:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for pycairo, by Rudson R. Alves
# requires: cairo python
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
elif [ "$ARCH" = "x86_64" ]; then
- SLKCFLAGS="-O2"
+ SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
pycairo:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for pycrypto, by Silvio Rhatto
-# requires: python
+# requires: python
# tested: pycrypto-2.0.1
#
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
elif [ "$ARCH" = "x86_64" ]; then
- SLKCFLAGS="-O2"
+ SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
wget "$URL" -O "$SRC_DIR/$SRC" || exit $ERROR_WGET
fi
-
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC=`ls -l | awk '/^d/ { print $8 }'`
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Build and install package
-python setup.py build install --root=$PKG
+python setup.py build install --root=$PKG || exit $ERROR_INSTALL
# Strip binaries
( cd "$PKG"
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
pycrypto:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
pygame:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for pygtk, by Rudson R. Alves
# requires: pygobject
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
elif [ "$ARCH" = "x86_64" ]; then
- SLKCFLAGS="-O2"
+ SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
pygtk:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for pysqlite, by Silvio Rhatto
# requires: sqlite
elif [ "$ARCH" = "x86_64" ]; then
SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Build and install package
-python setup.py build install --root=$PKG
+python setup.py build install --root=$PKG || exit $ERROR_INSTALL
# Strip binaries
( cd "$PKG"
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
pysqlite:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
simplejson:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
Twisted:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
visual:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for wxPython, by Silvio Rhatto
-# requires: python wxWidgets
+# requires: python wxWidgets
# tested: wxPython-2.8.7.1
#
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
elif [ "$ARCH" = "x86_64" ]; then
- SLKCFLAGS="-O2"
+ SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
wget "$URL" -O "$SRC_DIR/$SRC" || exit $ERROR_WGET
fi
-
# Untar
cd "$PKG_WORK"
tar xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
cd "$PKG_SRC/$PKG_NAME"
# Build and install package
-python setup.py build install --root=$PKG
+python setup.py build install --root=$PKG || exit $ERROR_INSTALL
# Strip binaries
( cd "$PKG"
)
# Install documentation
-DOCS="NEWS TODO README AUTHORS INSTALL ChangeLog MAINTAINERS COPYING readme.*"
+DOCS="NEWS TODO README AUTHORS INSTALL ChangeLog MAINTAINERS COPYING LICENSE SIGNATURE readme.*"
mkdir -p "$PKG/usr/doc/$PKG_NAME-$PKG_VERSION" || exit $ERROR_MKDIR
for doc in $DOCS; do
if [ -f "$doc" ]; then
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
wxPython:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for bashdb, by Rudson R. Alves
# requires: ddd
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
elif [ "$ARCH" = "x86_64" ]; then
- SLKCFLAGS="-O2"
+ SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
bashdb:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for ddd, by Rudson R. Alves
# requires: gdb bashdb pydb
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
elif [ "$ARCH" = "x86_64" ]; then
- SLKCFLAGS="-O2"
+ SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
)
# Install documentation
-DOCS="NEWS TODO README AUTHORS INSTALL ChangeLog MAINTAINERS COPYING readme.*"
+DOCS="NEWS TODO README AUTHORS INSTALL ChangeLog MAINTAINERS COPYING LICENSE SIGNATURE readme.*"
mkdir -p "$PKG/usr/doc/$PKG_NAME-$PKG_VERSION" || exit $ERROR_MKDIR
for doc in $DOCS; do
if [ -f "$doc" ]; then
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
ddd:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
gazpacho:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
SRC_NAME="glade3"
PKG_NAME="glade"
ARCH=${ARCH:=i486}
-SRC_VERSION=${VERSION:=3.4.5}
+SRC_VERSION=${VERSION:=3.1.5}
PKG_VERSION="$(echo "$SRC_VERSION" | tr '[[:blank:]-]' '_')"
BUILD=${BUILD:=1rra}
SRC_DIR=${SRC_DIR:=$CWD}/$PKG_NAME
# Dowload source if necessary
SRC="$SRC_NAME-$VERSION.tar.bz2"
-URL="http://ftp.gnome.org/pub/GNOME/sources/glade3/3.4/$SRC"
+URL="http://ftp.gnome.org/pub/GNOME/sources/glade3/3.1/$SRC"
if [ ! -s "$SRC_DIR/$SRC" ] || ! bunzip2 -t "$SRC_DIR/$SRC" 2> /dev/null; then
wget "$URL" -O "$SRC_DIR/$SRC" || exit $ERROR_WGET
glade:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for monodoc, by Rudson R. Alves
# requires: mono
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
elif [ "$ARCH" = "x86_64" ]; then
- SLKCFLAGS="-O2"
+ SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
unzip "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
monodoc: in the Mono/Doctools module of Ximian Bugzilla (bugzilla.ximian.com)
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
omake:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for pydb, by Rudson R. Alves
# requires: ddd
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
elif [ "$ARCH" = "x86_64" ]; then
- SLKCFLAGS="-O2"
+ SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
pydb:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for dosbox, by Rudson R. Alves
# requires: sdl ncurses libpng sdl-net sdl-sound
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
elif [ "$ARCH" = "x86_64" ]; then
- SLKCFLAGS="-O2"
+ SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
dosbox: compatibility with older games...
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
eel:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for gail, by Rudson R. Alves
# requires: gtk+
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
elif [ "$ARCH" = "x86_64" ]; then
- SLKCFLAGS="-O2"
+ SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
gail:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for GConf, by Rudson R. Alves
# requires: glib
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
elif [ "$ARCH" = "x86_64" ]; then
- SLKCFLAGS="-O2"
+ SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
gconf:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
gnome-keyring:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
gnome-menus:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for gnome-vfs, by Rudson R. Alves
# requires: glib libxml2 gnome-mime-data dbus-glib
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
elif [ "$ARCH" = "x86_64" ]; then
- SLKCFLAGS="-O2"
+ SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
gnome-vfs:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for libgnome, by Rudson R. Alves
# requires: glib gnome-vfs libbonobo esound audiofile
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
elif [ "$ARCH" = "x86_64" ]; then
- SLKCFLAGS="-O2"
+ SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
)
# Install documentation
-DOCS="NEWS TODO README AUTHORS INSTALL ChangeLog MAINTAINERS COPYING readme.*"
+DOCS="NEWS TODO README AUTHORS INSTALL ChangeLog MAINTAINERS COPYING LICENSE SIGNATURE readme.*"
mkdir -p "$PKG/usr/doc/$PKG_NAME-$PKG_VERSION" || exit $ERROR_MKDIR
for doc in $DOCS; do
if [ -f "$doc" ]; then
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
libgnome:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for libgnomecanvas, by Rudson R. Alves
# requires: gail
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
elif [ "$ARCH" = "x86_64" ]; then
- SLKCFLAGS="-O2"
+ SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
)
# Install documentation
-DOCS="NEWS TODO README AUTHORS INSTALL ChangeLog MAINTAINERS COPYING readme.*"
+DOCS="NEWS TODO README AUTHORS INSTALL ChangeLog MAINTAINERS COPYING LICENSE SIGNATURE readme.*"
mkdir -p "$PKG/usr/doc/$PKG_NAME-$PKG_VERSION" || exit $ERROR_MKDIR
for doc in $DOCS; do
if [ -f "$doc" ]; then
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
libgnomecanvas: required.
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for libgnomeui, by Rudson R. Alves
# requires: libxml2 libgnome libgnomecanvas libbonoboui pango glib gnome-vfs gnome-keyring
-# tested: libgnomeui-2.22.01
+# tested: libgnomeui-2.22.1
#
# Look for slackbuildrc
SRC_NAME="libgnomeui"
PKG_NAME="libgnomeui"
ARCH=${ARCH:=i486}
-SRC_VERSION=${VERSION:=2.22.01}
+SRC_VERSION=${VERSION:=2.22.1}
PKG_VERSION="$(echo "$SRC_VERSION" | tr '[[:blank:]-]' '_')"
BUILD=${BUILD:=1rra}
SRC_DIR=${SRC_DIR:=$CWD}/$PKG_NAME
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
elif [ "$ARCH" = "x86_64" ]; then
- SLKCFLAGS="-O2"
+ SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
libgnomeui:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for at-spi, by Rudson R. Alves
# requires: atk libbonobo
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
elif [ "$ARCH" = "x86_64" ]; then
- SLKCFLAGS="-O2"
+ SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
at-spi: - docs: this directory contains documentation for the AT-SPI.
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
sylpheed:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for maildrop, by Silvio Rhatto
# requires: courier-authlib
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
elif [ "$ARCH" = "x86_64" ]; then
- SLKCFLAGS="-O2"
+ SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC=`ls -l | awk '/^d/ { print $8 }'`
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
echo Creating user and group vmail, if they does not exist...
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
maildrop:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for digikam, by Your name
# requires: qt kdebase sqlite gphoto2 libkipi libkexiv2 libkdcraw lcms libtiff libpng jasper kipi-plugins mjpegtools
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
elif [ "$ARCH" = "x86_64" ]; then
- SLKCFLAGS="-O2"
+ SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
digikam:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
gphoto2:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
gtkam:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for inkscape, by Alexandre Vieira de Souza
# requires: gtk+2 gtkmm glib2 libsigc++ libxslt libxml2
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
elif [ "$ARCH" = "x86_64" ]; then
- SLKCFLAGS="-O2"
+ SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
)
# Install documentation
-DOCS="NEWS TODO README AUTHORS INSTALL ChangeLog MAINTAINERS COPYING readme.*"
+DOCS="NEWS TODO README AUTHORS INSTALL ChangeLog MAINTAINERS COPYING LICENSE SIGNATURE readme.*"
mkdir -p "$PKG/usr/doc/$PKG_NAME-$PKG_VERSION" || exit $ERROR_MKDIR
for doc in $DOCS; do
if [ -f "$doc" ]; then
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
inkscape: TIFF, and exports PNG as well as multiple vector-based formats.
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
aubio:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
edje:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
efreet:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
embryo:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
emotion:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
gst-ffmpeg:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
gst-plugins-bad:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
gst-plugins-base:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
gst-plugins-good:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
gst-plugins-ugly:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for GUIlib, by Rudson R. Alves
# requires: sdl
elif [ "$ARCH" = "x86_64" ]; then
SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
GUIlib:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for libdc1394, by Silvio Rhatto
# requires: libraw1394
elif [ "$ARCH" = "x86_64" ]; then
SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
libdc1394:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for libdvdread, by Rudson R. Alves
# requires: libdvdcss
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
elif [ "$ARCH" = "x86_64" ]; then
- SLKCFLAGS="-O2"
+ SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
libdvdread: advanced features of the DVD format.
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
libiec61883:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
libjackasyn:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for libkdcraw, by Rudson R. Alves
# requires: lcms
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
elif [ "$ARCH" = "x86_64" ]; then
- SLKCFLAGS="-O2"
+ SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
libkdcraw:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for libkexiv2, by Rudson R. Alves
# requires: exiv2
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
elif [ "$ARCH" = "x86_64" ]; then
- SLKCFLAGS="-O2"
+ SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
libkexiv2: kipi host programs.
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
liblrdf:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
libquicktime:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
SRC_NAME="libx264"
PKG_NAME="libx264"
ARCH=${ARCH:=i486}
-SRC_VERSION=${VERSION:=20080729}
+SRC_VERSION=${VERSION:=20080714}
PKG_VERSION="$(echo "$SRC_VERSION" | tr '[[:blank:]-]' '_')"
BUILD=${BUILD:=1rha}
SRC_DIR=${SRC_DIR:=$CWD}/$PKG_NAME
libx264:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
openexr:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for SDL_image, by Rudson R. Alves
# requires: sdl
elif [ "$ARCH" = "x86_64" ]; then
SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
SDL_image:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for SDL_mixer, by Rudson R. Alves
# requires: sdl
elif [ "$ARCH" = "x86_64" ]; then
SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
SDL_mixer:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for SDL_net, by Rudson R. Alves
# requires: sdl
elif [ "$ARCH" = "x86_64" ]; then
SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
SDL_net:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for SDL_rotozoom, by Rudson R. Alves
# requires: sdl
elif [ "$ARCH" = "x86_64" ]; then
SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
SDL_rotozoom:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for SDL_sound, by Rudson R. Alves
# requires: sdl
elif [ "$ARCH" = "x86_64" ]; then
SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
sdl-sound: conversion on-the-fly.
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
ARCH=${ARCH:=i486}
SRC_VERSION=${VERSION:=2.0.9}
PKG_VERSION="$(echo "$SRC_VERSION" | tr '[[:blank:]-]' '_')"
-BUILD=${BUILD:=1srv}
+BUILD=${BUILD:=1rra}
SRC_DIR=${SRC_DIR:=$CWD}/$PKG_NAME
TMP=${TMP:=/tmp}
PKG=${PKG:=$TMP/package-$PKG_NAME}
elif [ "$ARCH" = "x86_64" ]; then
SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
# customary to leave one space after the ':'.
_ |-----handy-ruler------------------------------------------------------|
-SDL_tff: SDL_tff by Slack.Sarava
-SDL_tff:
-SDL_tff: This library allows you to use TrueType fonts to render text in SDL
-SDL_tff: applications.
-SDL_tff:
-SDL_tff:
-SDL_tff:
-SDL_tff:
-SDL_tff:
-SDL_tff:
-SDL_tff:
+SDL_ttf: SDL_ttf by Slack.Sarava
+SDL_ttf:
+SDL_ttf: This library allows you to use TrueType fonts to render text in SDL
+SDL_ttf: applications.
+SDL_ttf:
+SDL_ttf:
+SDL_ttf:
+SDL_ttf:
+SDL_ttf:
+SDL_ttf:
+SDL_ttf:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
smpeg:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for kipi-plugins, by Rudson R. Alves
# requires: libkipi libkexiv2 libkdcraw gphoto2 libtiff kdepim libxslt libgpod mjpegtools k3b imagemagick
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
elif [ "$ARCH" = "x86_64" ]; then
- SLKCFLAGS="-O2"
+ SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
kipi-plugins:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
swfdec-mozilla:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
swfdec:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
swh-plugins:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
xmms-jack:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
xmms-jackasyn:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
done
# Add a post-installation script (doinst.sh)
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EOSCRIPT > "$PKG/install/doinst.sh"
config() {
NEW="\$1"
config etc/gnuradio/conf.d/gnuradio-core.conf.new ; config etc/gnuradio/conf.d/gr-audio-alsa.conf.new ; config etc/gnuradio/conf.d/gr-audio-jack.conf.new ; etc/gnuradio/conf.d/gr-audio-oss.conf.new ; config etc/gnuradio/conf.d/gr-wxgui.conf.new
EOSCRIPT
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for grc, by Silvio Rhatto
# requires: gnuradio
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Build and install package
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
grc:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
ardour:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
audacity:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
cmt:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
darkice:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
strip darksnow
make make_pkg
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
mv *-1rd.tgz $REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for ezstream, by Silvio Rhatto - rhatto at riseup.net
-# requires: libshout
+# requires: libshout
# tested: ezstream-0.5.1
#
PKG=${PKG:=$TMP/package-$PKG_NAME}
REPOS=${REPOS:=$TMP}
PREFIX=${PREFIX:=/usr}
-PKG_SRC="$TMP/$SRC_NAME-$SRC_VERSION"
+PKG_WORK="$TMP/$SRC_NAME"
CONF_OPTIONS=${CONF_OPTIONS:=""}
NUMJOBS=${NUMJOBS:=""}
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
elif [ "$ARCH" = "x86_64" ]; then
- SLKCFLAGS="-O2"
+ SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
ERROR_PATCH=40; ERROR_VCS=41; ERROR_MKDIR=42
# Clean up any leftovers of previous builds
-rm -rf "$PKG_SRC" 2> /dev/null
+rm -rf "$PKG_WORK" 2> /dev/null
rm -rf "$PKG" 2> /dev/null
# Create directories if necessary
mkdir -p "$SRC_DIR" || exit $ERROR_MKDIR
mkdir -p "$PKG" || exit $ERROR_MKDIR
mkdir -p "$REPOS" || exit $ERROR_MKDIR
+mkdir -p "$PKG_WORK" || exit $ERROR_MKDIR
# Dowload source if necessary
SRC="$SRC_NAME-$VERSION.tar.gz"
wget "$URL" -O "$SRC_DIR/$SRC" || exit $ERROR_WGET
fi
-
# Untar
-cd "$TMP"
+cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
# Install documentation
DOCS="COPYING ChangeLog INSTALL NEWS README"
mkdir -p "$PKG/usr/doc/$PKG_NAME-$PKG_VERSION" || exit $ERROR_MKDIR
-cp -a $DOCS "$PKG/usr/doc/$PKG_NAME-$PKG_VERSION"
+for doc in $DOCS; do
+ if [ -f "$doc" ]; then
+ cp -a $doc "$PKG/usr/doc/$PKG_NAME-$PKG_VERSION"
+ fi
+done
# Add package description (slack-desc)
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
gnuradio:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
- rm -rf "$PKG_SRC" "$PKG"
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
+ rm -rf "$PKG_WORK" "$PKG"
fi
hydrogen:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
jack-rack:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
jack:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
lmms:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
pd:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
qjackctl:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for xmms, by Alexandre Vieira de Souza
-# requires: alsa-lib audiofile esound glib glibc-solibs gtk+ libICE libSM libX11 libXau libXdmcp libXext libXxf86vm libdrm libmikmod libogg libvorbis libxcb mesa zlib
+# requires: libmikmod
# tested: xmms-1.2.11
#
PREFIX=${PREFIX:=/usr}
PKG_WORK="$TMP/$SRC_NAME"
CONF_OPTIONS=${CONF_OPTIONS:=""}
-NUMJOBS=${NUMJOBS:="-j1"}
+NUMJOBS=${NUMJOBS:="-j4"}
# Set system libraries' path and optmization flags based on $ARCH
LIBDIR="$PREFIX/lib"
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
elif [ "$ARCH" = "x86_64" ]; then
- SLKCFLAGS="-O2"
+ SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
)
# Install documentation
-DOCS="NEWS TODO README AUTHORS INSTALL ChangeLog MAINTAINERS COPYING readme.*"
+DOCS="NEWS TODO README AUTHORS INSTALL ChangeLog MAINTAINERS COPYING LICENSE SIGNATURE readme.*"
mkdir -p "$PKG/usr/doc/$PKG_NAME-$PKG_VERSION" || exit $ERROR_MKDIR
for doc in $DOCS; do
if [ -f "$doc" ]; then
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
xmms:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
cinelerra:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for dvdauthor, by Rudson R. Alves
# requires: libdvdread
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
elif [ "$ARCH" = "x86_64" ]; then
- SLKCFLAGS="-O2"
+ SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
dvdauthor:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
dvgrab:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
ffmpeg:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
ffmpeg2theora:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for kaffeine, by Rudson R. Alves
# requires: xine-lib kdelibs lame libdvdcss
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
elif [ "$ARCH" = "x86_64" ]; then
- SLKCFLAGS="-O2"
+ SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
kaffeine:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
kino:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
mjpegtools:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
MPlayer:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
oggfwd:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
strip theorur
make make_pkg
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
mv *-1rd.tgz $REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for vamps, by Rudson R. Alves
# requires: dvdauthor libdvdread
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
elif [ "$ARCH" = "x86_64" ]; then
- SLKCFLAGS="-O2"
+ SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Compile
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
vamps:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
vlc:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for avahi, by Rudson R. Alves
# requires: glib2 expat libdaemon mono monodoc xmltoman
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
avahi: of Avahi.
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
done
# Add a post-installation script (doinst.sh)
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EOSCRIPT > "$PKG/install/doinst.sh"
config() {
NEW="\$1"
config etc/bitlbee/bitlbee.conf.new
EOSCRIPT
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
mkdir -p $PKG/etc/bitlbee
cp bitlbee.conf $PKG/etc/bitlbee/bitlbee.conf.new
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for ekiga, by rafael
# requires: opal gnome-doc-utils libgnome libgnomeui
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
elif [ "$ARCH" = "x86_64" ]; then
- SLKCFLAGS="-O2"
+ SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
ekiga:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
EODESC
# Add a post-installation script (doinst.sh)
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EOSCRIPT > "$PKG/install/doinst.sh"
config() {
NEW="\$1"
config etc/feast.conf.new
EOSCRIPT
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for silc-client, by Silvio Rhatto
# requires: silc-toolkit
elif [ "$ARCH" = "x86_64" ]; then
SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
done
# Add a post-installation script (doinst.sh)
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EOSCRIPT > "$PKG/install/doinst.sh"
config() {
NEW="\$1"
OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+ OLD="\$(dirname \$NEW)/\$(basename \$OLD .sample)"
+ OLD="\$(dirname \$NEW)/\$(basename \$OLD .dist)"
+
# If there's no config file by that name, mv it over:
if [ ! -r \$OLD ]; then
mv \$NEW \$OLD
if ! grep -qe "^\$GROUP:" etc/group; then
echo Creating group \$GROUP...
chroot . /usr/sbin/groupadd \$GROUP
- fi
+ fi
}
mkuser() {
config etc/silc.conf
EOSCRIPT
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for silc-plugin, by Silvio Rhatto
# requires: silc-toolkit
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
silc-plugin:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for silc-server, by Silvio Rhatto
# requires: silc-toolkit
elif [ "$ARCH" = "x86_64" ]; then
SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
done
# Add a post-installation script (doinst.sh)
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EOSCRIPT > "$PKG/install/doinst.sh"
config() {
NEW="\$1"
OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+ OLD="\$(dirname \$NEW)/\$(basename \$OLD .sample)"
+ OLD="\$(dirname \$NEW)/\$(basename \$OLD .dist)"
+
# If there's no config file by that name, mv it over:
if [ ! -r \$OLD ]; then
mv \$NEW \$OLD
if ! grep -qe "^\$GROUP:" etc/group; then
echo Creating group \$GROUP...
chroot . /usr/sbin/groupadd \$GROUP
- fi
+ fi
}
mkuser() {
config etc/silcd.conf.new config etc/silcalgs.conf.new
EOSCRIPT
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for silc-toolkit, by Silvio Rhatto
# requires: libiconv
elif [ "$ARCH" = "x86_64" ]; then
SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
silc-toolkit:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for skype, by Rudson R. Alves
# requires: dbus alsa-lib libsigc++
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Install Skype
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
skype:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for opal, by Rudson R. Alves
# requires: pwlib
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
elif [ "$ARCH" = "x86_64" ]; then
- SLKCFLAGS="-O2"
+ SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
)
# Install documentation
-DOCS="NEWS TODO README AUTHORS INSTALL ChangeLog MAINTAINERS COPYING readme.*"
+DOCS="NEWS TODO README AUTHORS INSTALL ChangeLog MAINTAINERS COPYING LICENSE SIGNATURE readme.*"
mkdir -p "$PKG/usr/doc/$PKG_NAME-$PKG_VERSION" || exit $ERROR_MKDIR
for doc in $DOCS; do
if [ -f "$doc" ]; then
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
opal:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
bogofilter:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
done
# Add a post-installation script (doinst.sh)
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EOSCRIPT > "$PKG/install/doinst.sh"
config() {
NEW="\$1"
config etc/rc.d/rc.tor.new ; config etc/tor/torrc.sample ; config etc/tor/tor-tsocks.conf.new
EOSCRIPT
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for snownews, by Silvio Rhatto
# requires: libiconv
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
elif [ "$ARCH" = "x86_64" ]; then
- SLKCFLAGS="-O2"
+ SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
)
# Install documentation
-DOCS="NEWS TODO README AUTHORS INSTALL ChangeLog MAINTAINERS COPYING readme.*"
+DOCS="NEWS TODO README AUTHORS INSTALL ChangeLog MAINTAINERS COPYING LICENSE SIGNATURE readme.*"
mkdir -p "$PKG/usr/doc/$PKG_NAME-$PKG_VERSION" || exit $ERROR_MKDIR
for doc in $DOCS; do
if [ -f "$doc" ]; then
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
snownews:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for mldonkey, by Alexandre Vieira de Souza
# requires: librsvg gd ocaml lablgtk
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
elif [ "$ARCH" = "x86_64" ]; then
- SLKCFLAGS="-O2"
+ SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
)
# Install documentation
-DOCS="NEWS TODO README AUTHORS INSTALL ChangeLog MAINTAINERS COPYING readme.*"
+DOCS="NEWS TODO README AUTHORS INSTALL ChangeLog MAINTAINERS COPYING LICENSE SIGNATURE readme.*"
mkdir -p "$PKG/usr/doc/$PKG_NAME-$PKG_VERSION" || exit $ERROR_MKDIR
for doc in $DOCS; do
if [ -f "$doc" ]; then
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
mldonkey:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
gnash:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for cairo, by Silvio Rhatto
# requires: pixman
elif [ "$ARCH" = "x86_64" ]; then
SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
cairo:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
stellarium:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
octave:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for scilab, by Rudson R. Alves
# requires: gtk+2
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
elif [ "$ARCH" = "x86_64" ]; then
- SLKCFLAGS="-O2"
+ SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
scilab: world.
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for libavc1394, by Silvio Rhatto
# requires: libraw1394
elif [ "$ARCH" = "x86_64" ]; then
SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
libavc1394:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for libfreebob, by Rudson R. Alves
# requires: cxxlibs gcc glibc-solibs alsa-lib libavc1394 libiec61883 libraw1394 libxml2
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
elif [ "$ARCH" = "x86_64" ]; then
- SLKCFLAGS="-O2"
+ SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
libfreebob: * FreeBoB project aims to provide this generic Linux driver.
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
# slackbuild for htop, by Rudson R. Alves
# requires: ncurses
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
elif [ "$ARCH" = "x86_64" ]; then
- SLKCFLAGS="-O2"
+ SLKCFLAGS="-O2 -fPIC"
LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
fi
# Set error codes (used by createpkg)
# Untar
cd "$PKG_WORK"
tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
cd "$PKG_SRC"
# Configure
mkdir -p "$PKG/install" || exit $ERROR_MKDIR
cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
htop:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
Trac:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
TracAccountManager:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
TracPageAuthzEditor:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
ecore:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
esmart:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
etk:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
evas:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
ewl:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
gtkglext:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
vte:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
entrance:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
xbindkeys:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
Eterm: by avs
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
gnome-themes:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
awesome:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
enlightenment:
EODESC
+# Copy slack-required
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+if [ -f "$CWD/slack-required" ]; then
+ cp $CWD/slack-required $PKG/install
+fi
+
# Build the package
cd "$PKG"
makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
rm -rf "$PKG_WORK" "$PKG"
fi
projects / slackbuilds.git / commitdiff