Adding custom config for nodo::desktop

diff --git a/files/etc/pam.d/gdm b/files/etc/pam.d/gdm
new file mode 100644 (file)
index 0000000..c8c9888
--- /dev/null
+++ b/files/etc/pam.d/gdm
@@ -0,0 +1,12 @@
+#%PAM-1.0
+auth    requisite       pam_nologin.so
+auth    required        pam_env.so readenv=1
+auth    required        pam_env.so readenv=1 envfile=/etc/default/locale
+@include common-auth
+auth    optional        pam_gnome_keyring.so
+@include common-account
+session required        pam_limits.so
+@include common-session
+session optional        pam_gnome_keyring.so auto_start
+@include common-password
+@include common-pammount

diff --git a/files/etc/pam.d/login b/files/etc/pam.d/login
new file mode 100644 (file)
index 0000000..fd498c4
--- /dev/null
+++ b/files/etc/pam.d/login
@@ -0,0 +1,84 @@
+#
+# The PAM configuration file for the Shadow `login' service
+#
+
+# Enforce a minimal delay in case of failure (in microseconds).
+# (Replaces the `FAIL_DELAY' setting from login.defs)
+# Note that other modules may require another minimal delay. (for example,
+# to disable any delay, you should add the nodelay option to pam_unix)
+auth       optional   pam_faildelay.so  delay=3000000
+
+# Outputs an issue file prior to each login prompt (Replaces the
+# ISSUE_FILE option from login.defs). Uncomment for use
+# auth       required   pam_issue.so issue=/etc/issue
+
+# Disallows root logins except on tty's listed in /etc/securetty
+# (Replaces the `CONSOLE' setting from login.defs)
+auth       [success=ok ignore=ignore user_unknown=ignore default=die]  pam_securetty.so
+
+# Disallows other than root logins when /etc/nologin exists
+# (Replaces the `NOLOGINS_FILE' option from login.defs)
+auth       requisite  pam_nologin.so
+
+# This module parses environment configuration file(s)
+# and also allows you to use an extended config
+# file /etc/security/pam_env.conf.
+# 
+# parsing /etc/environment needs "readenv=1"
+session       required   pam_env.so readenv=1
+# locale variables are also kept into /etc/default/locale in etch
+# reading this file *in addition to /etc/environment* does not hurt
+session       required   pam_env.so readenv=1 envfile=/etc/default/locale
+
+# Standard Un*x authentication.
+@include common-auth
+
+# This allows certain extra groups to be granted to a user
+# based on things like time of day, tty, service, and user.
+# Please edit /etc/security/group.conf to fit your needs
+# (Replaces the `CONSOLE_GROUPS' option in login.defs)
+auth       optional   pam_group.so
+
+# Uncomment and edit /etc/security/time.conf if you need to set
+# time restrainst on logins.
+# (Replaces the `PORTTIME_CHECKS_ENAB' option from login.defs
+# as well as /etc/porttime)
+# account    requisite  pam_time.so
+
+# Uncomment and edit /etc/security/access.conf if you need to
+# set access limits.
+# (Replaces /etc/login.access file)
+# account  required       pam_access.so
+
+# Sets up user limits according to /etc/security/limits.conf
+# (Replaces the use of /etc/limits in old login)
+session    required   pam_limits.so
+
+# Prints the last login info upon succesful login
+# (Replaces the `LASTLOG_ENAB' option from login.defs)
+session    optional   pam_lastlog.so
+
+# Prints the motd upon succesful login
+# (Replaces the `MOTD_FILE' option in login.defs)
+session    optional   pam_motd.so
+
+# Prints the status of the user's mailbox upon succesful login
+# (Replaces the `MAIL_CHECK_ENAB' option from login.defs). 
+#
+# This also defines the MAIL environment variable
+# However, userdel also needs MAIL_DIR and MAIL_FILE variables
+# in /etc/login.defs to make sure that removing a user 
+# also removes the user's mail spool file.
+# See comments in /etc/login.defs
+session    optional   pam_mail.so standard
+
+# SELinux needs to intervene at login time to ensure that the process
+# starts in the proper default security context.
+# Uncomment the following line to enable SELinux
+# session required pam_selinux.so select_context
+
+# Standard Un*x account and session
+@include common-account
+@include common-session
+@include common-password
+@include common-pammount

diff --git a/manifests/init.pp b/manifests/init.pp
index 152fcd162492962e39cd770c2e4e907ebae52d23..f66edb1614f79b9f859260a7357e75dcf97d8922 100644 (file)
--- a/manifests/init.pp
+++ b/manifests/init.pp
@@ -190,6 +190,30 @@ class nodo::desktop inherits nodo::physical {
     mode    => 0644,
     ensure  => present,
   }
+
+  # data
+  file { "/var/data":
+    ensure => directory,
+    mode   => 0755,
+  }
+
+  # pam - login
+  file { "/etc/pam.d/login":
+    source  => "puppet://$desktop/modules/nodo/etc/pam.d/login",
+    owner   => "root",
+    group   => "root",
+    mode    => 0644,
+    ensure  => present,
+  }
+
+  # pam - gdm
+  file { "/etc/pam.d/gdm":
+    source  => "puppet://$desktop/modules/nodo/etc/pam.d/gdm",
+    owner   => "root",
+    group   => "root",
+    mode    => 0644,
+    ensure  => present,
+  }
 }
 
 class nodo::vserver inherits nodo {

diff --git a/manifests/utils.pp b/manifests/utils.pp
index b30bb4d358dbffd21084d11541136a6b4f9baad6..b38c58589cdf38de2bc6829a1957047e583730cf 100644 (file)
--- a/manifests/utils.pp
+++ b/manifests/utils.pp
@@ -26,7 +26,7 @@ class utils::web {
   }
 }
 
-# Common utilities for desktops
+# Common utilities for desktop
 class utils::desktop {
   package { [ 'awesome',      'alsa-tools-gui', 'mutt',
               'irssi',        'offlineimap',    'wyrd',
@@ -36,4 +36,3 @@ class utils::desktop {
     ensure => installed,
   }
 }
-