#!/bin/bash
#
-# courier-authlib.SlackBuild is free software; you can redistribute it and/or modify it under the
-# terms of the GNU General Public License as published by the Free Software
-# Foundation; either version 2 of the License, or any later version.
+# courier-authlib.SlackBuild is free software; you can redistribute
+# it and/or modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of the License,
+# or any later version.
#
-# courier-authlib.SlackBuild is distributed in the hope that it will be useful, but WITHOUT ANY
-# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
-# A PARTICULAR PURPOSE. See the GNU General Public License for more details.
+# courier-authlib.SlackBuild is distributed in the hope that it will
+# be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+# Public License for more details.
#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
#
-# slackbuild script for courier-authlib
-# by rhatto at riseup.net
+# slackbuild for courier-authlib, by Silvio Rhatto
+# requires:
+# tested: courier-authlib-0.62.2
+# model: generic.mkSlackBuild $Rev: 805 $
#
-if [ -s "slack-required" ]; then
- echo Recomended and required packages for building courier-authlib are:
- cat slack-required | sed -e 's/^/\t/'
- if [ "$INTERACT" != "no" ]; then
- echo If you dont have those installed, press Ctrl-C. Otherwise, hit ENTER.
- read crap
-# else
-# echo Sleeping 3 seconds...
-# sleep 3
- fi
-fi
-
-CWD="`pwd`"
-
+# Look for slackbuildrc
if [ -f ~/.slackbuildrc ]; then
source ~/.slackbuildrc
elif [ -f /etc/slackbuildrc ]; then
source /etc/slackbuildrc
fi
-# default settings
-PACKAGE="courier-authlib"
-VERSION=${VERION:=0.59.3}
+# Set variables
+CWD="$(pwd)"
+SRC_NAME="courier-authlib"
+PKG_NAME="courier-authlib"
ARCH=${ARCH:=i486}
-BUILD=${BUILD:=2rha}
+SRC_VERSION=${VERSION:=0.62.2}
+PKG_VERSION="$(echo "$SRC_VERSION" | tr '[[:blank:]-]' '_')"
+BUILD=${BUILD:=1rha}
+SRC_DIR=${SRC_DIR:=$CWD}/$PKG_NAME
TMP=${TMP:=/tmp}
+PKG=${PKG:=$TMP/package-$PKG_NAME}
REPOS=${REPOS:=$TMP}
-SRC_DIR=${SRC:=$CWD}
+SLACKBUILD_PATH=${SLACKBUILD_PATH:="net/libs/courier-authlib"}
+PREFIX=${PREFIX:=/usr}
+PKG_WORK="$TMP/$SRC_NAME"
+CONF_OPTIONS=${CONF_OPTIONS:="--sysconfdir=/etc"}
+NUMJOBS=${NUMJOBS:=""}
-# ------- error codes for createpkg --------------
+# Set system libraries' path and optmization flags based on $ARCH
+LIBDIR="$PREFIX/lib"
+
+if [ "$ARCH" = "i386" ]; then
+ SLKCFLAGS="-O2 -march=i386 -mtune=i686"
+elif [ "$ARCH" = "i486" ]; then
+ SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+elif [ "$ARCH" = "i686" ]; then
+ SLKCFLAGS="-O2 -march=i686"
+elif [ "$ARCH" = "s390" ]; then
+ SLKCFLAGS="-O2"
+elif [ "$ARCH" = "x86_64" ]; then
+ SLKCFLAGS="-O2 -fPIC"
+ LIBDIR="$PREFIX/lib64"
+ LDFLAGS="-L/lib64 -L/usr/lib64"
+fi
+
+# Set error codes (used by createpkg)
ERROR_WGET=31; ERROR_MAKE=32; ERROR_INSTALL=33
ERROR_MD5=34; ERROR_CONF=35; ERROR_HELP=36
ERROR_TAR=37; ERROR_MKPKG=38; ERROR_GPG=39
-ERROR_PATCH=40
+ERROR_PATCH=40; ERROR_VCS=41; ERROR_MKDIR=42
+ERROR_MANIFEST=43;
-if [ "$ARCH" == "x86_64" ]; then
- LIBDIR=/usr/lib64
-else
- LIBDIR=/usr/lib
-fi
+# Clean up any leftovers of previous builds
+rm -rf "$PKG_WORK" 2> /dev/null
+rm -rf "$PKG" 2> /dev/null
-RTOOL="wget"
-PACKAGE_EXT="bz2"
-KEY="http://www.courier-mta.org/KEYS.bin"
-SRC="$PACKAGE-$VERSION.tar.$PACKAGE_EXT"
-URL="http://easynews.dl.sourceforge.net/sourceforge/courier/$SRC"
+# Create directories if necessary
+mkdir -p "$SRC_DIR" || exit $ERROR_MKDIR
+mkdir -p "$PKG" || exit $ERROR_MKDIR
+mkdir -p "$REPOS" || exit $ERROR_MKDIR
+mkdir -p "$PKG_WORK" || exit $ERROR_MKDIR
-SRC_DIR="$SRC_DIR/$PACKAGE"
-mkdir -p $SRC_DIR
+# Dowload source if necessary
+SRC="$SRC_NAME-$VERSION.tar.bz2"
+URL="http://downloads.sourceforge.net/courier/$SRC"
-if [ "$RTOOL" == "wget" ] && [ ! -f "$SRC_DIR/$SRC" ]; then
+if [ ! -s "$SRC_DIR/$SRC" ] || ! bunzip2 -t "$SRC_DIR/$SRC" 2> /dev/null; then
wget "$URL" -O "$SRC_DIR/$SRC" || exit $ERROR_WGET
- wget "$URL.sig" -O "$SRC_DIR/$SRC.sig" || exit $ERROR_WGET
fi
-if [ ! -f "$SRC_DIR/$PACKAGE-key.asc" ]; then
- wget "$KEY" -O "$SRC_DIR/$PACKAGE-key.asc" && gpg --import $SRC_DIR/$PACKAGE-key.asc || exit $ERROR_WGET
-fi
+# Check Manifest file
+if [ -e "$CWD/Manifest" ]; then
+
+ # Manifest signature checking
+ if grep -q -- "-----BEGIN PGP SIGNED MESSAGE-----" $CWD/Manifest; then
+ echo "Checking Manifest signature..."
+ gpg --verify $CWD/Manifest
+ if [ "$?" != "0" ]; then
+ exit $ERROR_MANIFEST
+ fi
+ fi
+
+ MANIFEST_LINES="`grep -E -v "^(MKBUILD|SLACKBUILD)" $CWD/Manifest | wc -l`"
+
+ for ((MANIFEST_COUNT=1; MANIFEST_COUNT <= $MANIFEST_LINES; MANIFEST_COUNT++)); do
+
+ MANIFEST_LINE="`grep -E -v "^(MKBUILD|SLACKBUILD)" $CWD/Manifest | head -n $MANIFEST_COUNT | tail -n 1`"
+ MANIFEST_FILE="`echo $MANIFEST_LINE | awk '{ print $2 }'`"
+ MANIFEST_FILE_TYPE="`echo $MANIFEST_LINE | awk '{ print $1 }'`"
+
+ if [ -e "$SRC_DIR/$MANIFEST_FILE" ]; then
+ MANIFEST_FILE="$SRC_DIR/$MANIFEST_FILE"
+ else
+ MANIFEST_FILE="`find $CWD -name $MANIFEST_FILE`"
+ fi
-gpg --verify $SRC_DIR/$SRC.sig $SRC_DIR/$SRC || exit $ERROR_GPG
+ if [ ! -e "$MANIFEST_FILE" ] || [ -d "$MANIFEST_FILE" ]; then
+ continue
+ fi
-TMP="$TMP/$PACKAGE"
-rm -rf $TMP
-mkdir -p $TMP
-cd $TMP
+ echo "Checking Manifest for $MANIFEST_FILE_TYPE $MANIFEST_FILE integrity..."
-tar xvf $SRC_DIR/$SRC || exit $ERROR_TAR
-cd $PACKAGE-$VERSION
+ SIZE_SRC="`wc -c $MANIFEST_FILE | awk '{ print $1 }'`"
+ SIZE_MANIFEST="`echo $MANIFEST_LINE | awk '{ print $3 }'`"
-./configure --prefix=/usr --sysconfdir=/etc --libdir=$LIBDIR || exit $ERROR_CONF
+ # Check source code size
+ if [ "$SIZE_SRC" != "$SIZE_MANIFEST" ]; then
+ echo "SIZE Manifest: $SIZE_MANIFEST; SIZE $SRC: $SIZE_SRC"
+ exit $ERROR_MANIFEST
+ else
+ echo "Size match."
+ fi
-make || exit $ERROR_MAKE
-make DESTDIR=$TMP/package-$PACKAGE install || exit $ERROR_INSTALL
-make install-migrate DESTDIR=$TMP/package-$PACKAGE install || exit $ERROR_INSTALL
-make install-configure DESTDIR=$TMP/package-$PACKAGE install || exit $ERROR_INSTALL
+ # Check source code integrity
+ for ALGO in md5 rmd160 sha1 sha256 sha512; do
+ if [ $ALGO = "rmd160" ]; then
+ ALGO_SRC="`openssl rmd160 $MANIFEST_FILE | awk '{ print $2 }'`"
+ else
+ ALGO_SRC="`"$ALGO"sum $MANIFEST_FILE | awk '{ print $1 }'`"
+ fi
+ ALGO="`echo $ALGO | tr '[:lower:]' '[:upper:]'`"
+ ALGO_MANIFEST=$(echo $MANIFEST_LINE | sed "s/.* $ALGO //" | awk '{ print $1 }')
+ if [ "$ALGO_SRC" != "$ALGO_MANIFEST" ]; then
+ echo "$ALGO Manifest: $ALGO_MANIFEST; $ALGO $SRC: $ALGO_SRC"
+ exit $ERROR_MANIFEST
+ else
+ echo "$ALGO match."
+ fi
+ done
-mkdir -p $TMP/package-$PACKAGE/etc/rc.d
-cp $CWD/rc.courier-authlib.new $TMP/package-$PACKAGE/etc/rc.d
+ done
-rm $TMP/package-$PACKAGE/etc/authlib/{authdaemonrc,authldaprc,authmysqlrc}
+else
+ exit $ERROR_MANIFEST
+fi
+
+# Untar
+cd "$PKG_WORK"
+tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
+cd "$PKG_SRC"
+
+# Configure
+CFLAGS="$SLKCFLAGS" \
+ CXXFLAGS="$SLKCFLAGS" \
+ ./configure \
+ --prefix="$PREFIX" --libdir="$LIBDIR" $CONF_OPTIONS || exit $ERROR_CONF
-CWD="`pwd`"
+# Compile
+make $NUMJOBS || exit $ERROR_MAKE
-cd $TMP/package-$PACKAGE
+# Install
+make install DESTDIR="$PKG" || exit $ERROR_INSTALL
+make install-migrate DESTDIR=$PKG install || exit $ERROR_INSTALL
+make install-configure DESTDIR=$PKG install || exit $ERROR_INSTALL
-find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+# Strip binaries
+( cd "$PKG"
+ find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | \
+ xargs strip --strip-unneeded 2> /dev/null
+ find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | \
+ xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Copy init scripts
+mkdir -p $PKG/etc/rc.d
+cp $CWD/rc.* $PKG/etc/rc.d/
+
+# Install documentation
+DOCS="NEWS TODO README AUTHORS INSTALL ChangeLog MAINTAINERS COPYING LICENSE SIGNATURE readme.*"
+mkdir -p "$PKG/usr/doc/$PKG_NAME-$PKG_VERSION" || exit $ERROR_MKDIR
+for doc in $DOCS; do
+ if [ -f "$doc" ]; then
+ cp -a $doc "$PKG/usr/doc/$PKG_NAME-$PKG_VERSION"
+ fi
+done
-mkdir install
-cat << EOF > install/slack-desc
+# Add package description (slack-desc)
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+cat << EODESC > "$PKG/install/slack-desc"
# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
+# The "handy ruler" below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
+# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
- |-----handy-ruler-----------------------------------------------------|
+ |-----handy-ruler----------------------------------------------|
courier-authlib: courier-authlib (Courier Authentication Library)
courier-authlib:
courier-authlib: The Courier Authentication Library is an API toolkit for
courier-authlib:
courier-authlib:
courier-authlib:
-EOF
+EODESC
-# docs
-mkdir -p usr/doc/$PACKAGE-$VERSION
+# Add a post-installation script (doinst.sh)
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+cat << EOSCRIPT > "$PKG/install/doinst.sh"
+config() {
+ NEW="\$1"
+ OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
+ OLD="\$(dirname \$NEW)/\$(basename \$OLD .sample)"
+ OLD="\$(dirname \$NEW)/\$(basename \$OLD .dist)"
-for file in AUTHORS COPYING COPYING.GPL ChangeLog INSTALL INSTALL.html NEWS NEWS.html README; do
- cp $CWD/$file* usr/doc/$PACKAGE-$VERSION/
-done
+ # If there's no config file by that name, mv it over:
+ if [ ! -r \$OLD ]; then
+ mv \$NEW \$OLD
+ elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then
+ # toss the redundant copy
+ rm \$NEW
+ fi
+ # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+mkgroup() {
+ GROUP="\$1"
+ if ! grep -qe "^\$GROUP:" etc/group; then
+ echo Creating group \$GROUP...
+ chroot . /usr/sbin/groupadd \$GROUP
+ fi
+}
-echo '( chroot . /sbin/ldconfig )' > install/doinst.sh
-echo '( if [ ! -f "etc/rc.d/rc.courier-authlib" ]; then mv etc/rc.d/rc.courier-authlib.new etc/rc.d/rc.courier-authlib ; fi )' >> install/doinst.sh
+mkuser() {
+ USER="\$1"
+ if [ ! -z "\$2" ]; then
+ GROUP="\$2"
+ else
+ GROUP="\$USER"
+ fi
+ if ! grep -qe "^\$USER:" etc/passwd; then
+ echo Creating user \$USER...
+ chroot . /usr/sbin/useradd \$USER -g \$GROUP
+ fi
+}
-makepkg -c y -l y $REPOS/$PACKAGE-$VERSION-$ARCH-$BUILD.tgz || exit $ERROR_MKPKG
+config etc/rc.d/rc.courier-authlib.new
+EOSCRIPT
-if [ "$CLEANUP" == "yes" ]; then
- rm -rf $TMP
-fi
+# Build the package
+cd "$PKG"
+mkdir -p $REPOS/$SLACKBUILD_PATH
+makepkg -l y -c n "$REPOS/$SLACKBUILD_PATH/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
+# Delete source and build directories if requested
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
+ rm -rf "$PKG_WORK" "$PKG"
+fi
projects / slackbuilds.git / commitdiff