Provision: raspberry pi script

diff --git a/lib/hydra/functions b/lib/hydra/functions
index e6cf4a06771ed15f893663f0d35bde993ca66302..84590e5af6170cc3e61848ebbbdd2053fd6d49bf 100644 (file)
--- a/lib/hydra/functions
+++ b/lib/hydra/functions
@@ -10,6 +10,8 @@ source $APP_BASE/lib/hydra/usage
 source $APP_BASE/lib/hydra/action
 source $APP_BASE/lib/hydra/backup
 source $APP_BASE/lib/hydra/config
+source $APP_BASE/lib/hydra/deploy
+source $APP_BASE/lib/hydra/provision
 source $APP_BASE/lib/hydra/tmpfile
 
 # Setup environment

diff --git a/lib/hydra/provision b/lib/hydra/provision
new file mode 100644 (file)
index 0000000..5c85e04
--- /dev/null
+++ b/lib/hydra/provision
@@ -0,0 +1,45 @@
+#!/bin/bash
+
+# Load provision configuration
+function hydra_provision_load_config {
+if [ ! -z "$1" ]; then
+  if [ -f "$1" ]; then
+    echo "Using configuration from file $1..."
+    source "$1"
+  elif [ -f "$1.conf" ]; then
+    echo "Using configuration from file $1.conf..."
+    source "$1.conf"
+  elif [ -f "$HYDRA_FOLDER/config/provision/$1" ]; then
+    echo "Using configuration from $HYDRA_FOLDER/config/provision/$1..."
+    source "$HYDRA_FOLDER/config/provision/$1"
+  elif [ -f "$HYDRA_FOLDER/config/provision/$1.conf" ]; then
+    echo "Using configuration from $HYDRA_FOLDER/config/provision/$1.conf..."
+    source "$HYDRA_FOLDER/config/provision/$1.conf"
+  elif [ -f "$APP_BASE/share/config/provision/$1" ]; then
+    echo "Using configuration from $APP_BASE/share/config/provision/$1..."
+    source "$APP_BASE/share/config/provision/$1"
+  elif [ -f "$APP_BASE/share/config/provision/$1.conf" ]; then
+    echo "Using configuration from $APP_BASE/share/config/provision/$1.conf..."
+    source "$APP_BASE/share/config/provision/$1.conf"
+  else
+    echo "Profile not found: $1"
+    exit 1
+  fi
+fi
+}
+
+# Networking.
+function hydra_provision_networking {
+  echo "Doing a basic network config..."
+  cat <<-EOF | $SUDO tee $WORK/etc/network/interfaces > /dev/null
+auto eth0
+allow-hotplug eth0
+iface eth0 inet dhcp
+EOF
+}
+
+function hydra_provision_fingerprints {
+  echo "OpenSSH fingerprints:"
+  hydra_sudo_run chroot $WORK ssh-keygen -l -f /etc/ssh/ssh_host_dsa_key.pub
+  hydra_sudo_run chroot $WORK ssh-keygen -l -f /etc/ssh/ssh_host_rsa_key.pub
+}

diff --git a/share/hydractl/provision b/share/hydractl/provision
index f214e0f8844aec2292a9f9f838f5838a15c02a47..79c88cc2f9128fb93d59efee6a517956c290701e 100755 (executable)
--- a/share/hydractl/provision
+++ b/share/hydractl/provision
@@ -111,31 +111,8 @@ function hydra_provision_config {
   hydra_user_config   mirror            http://http.debian.net/debian/   "Debian mirror"
 }
 
-# Setup.
-if [ ! -z "$1" ]; then
-  if [ -f "$1" ]; then
-    echo "Using configuration from file $1..."
-    source "$1"
-  elif [ -f "$1.conf" ]; then
-    echo "Using configuration from file $1.conf..."
-    source "$1.conf"
-  elif [ -f "$HYDRA_FOLDER/config/provision/$1" ]; then
-    echo "Using configuration from $HYDRA_FOLDER/config/provision/$1..."
-    source "$HYDRA_FOLDER/config/provision/$1"
-  elif [ -f "$HYDRA_FOLDER/config/provision/$1.conf" ]; then
-    echo "Using configuration from $HYDRA_FOLDER/config/provision/$1.conf..."
-    source "$HYDRA_FOLDER/config/provision/$1.conf"
-  elif [ -f "$APP_BASE/share/config/provision/$1" ]; then
-    echo "Using configuration from $APP_BASE/share/config/provision/$1..."
-    source "$APP_BASE/share/config/provision/$1"
-  elif [ -f "$APP_BASE/share/config/provision/$1.conf" ]; then
-    echo "Using configuration from $APP_BASE/share/config/provision/$1.conf..."
-    source "$APP_BASE/share/config/provision/$1.conf"
-  else
-    echo "Profile not found: $1"
-    exit 1
-  fi
-fi
+# Load configuration
+hydra_provision_load_config
 
 # Parameters
 WORK="/tmp/debootstrap"
@@ -434,12 +411,7 @@ echo "Installing basic utilities..."
 hydra_sudo_run chroot $WORK apt-get install screen cron lsb-release openssl -y
 
 # Networking.
-echo "Doing a basic network config..."
-cat <<-EOF | $SUDO tee $WORK/etc/network/interfaces > /dev/null
-auto eth0
-allow-hotplug eth0
-iface eth0 inet dhcp
-EOF
+hydra_provision_networking
 
 # Ssh.
 echo "Installing OpenSSH daemon..."
@@ -452,9 +424,8 @@ hydra_sudo_run chroot $WORK apt-get install sudo -y
 echo "Choose a root password."
 hydra_sudo_run chroot $WORK passwd root
 
-echo "OpenSSH fingerprints:"
-hydra_sudo_run chroot $WORK ssh-keygen -l -f /etc/ssh/ssh_host_dsa_key.pub
-hydra_sudo_run chroot $WORK ssh-keygen -l -f /etc/ssh/ssh_host_rsa_key.pub
+# Fingerprints
+hydra_provision_fingerprints
 
 cat <<-EOF
 

diff --git a/share/hydractl/provision-raspi b/share/hydractl/provision-raspi
new file mode 100755 (executable)
index 0000000..640616f
--- /dev/null
+++ b/share/hydractl/provision-raspi
@@ -0,0 +1,113 @@
+#!/bin/bash
+#
+# System installer, Raspberry Pi version.
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU Affero General Public License as
+# published by the Free Software Foundation, either version 3 of the
+# License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU Affero General Public License for more details.
+#
+# You should have received a copy of the GNU Affero General Public
+# License along with this program.  If not, see
+# <http://www.gnu.org/licenses/>.
+
+# Load.
+source $APP_BASE/lib/hydra/functions || exit 1
+hydra_config_load
+
+# Make sure there is provision config.
+function hydra_provision_config {
+  hydra_user_config   interactive       y                                "Interactive mode? (y/n)"
+  hydra_user_config   device            /dev/mmcblk0                     "Destination device"
+  hydra_user_config   hostname          machine                          "Hostname"
+  hydra_user_config   domain            example.org                      "Domain"
+  hydra_user_config   arch              armel                            "System arch"
+  hydra_user_config   version           jessie                           "Distro version"
+  hydra_user_config   mirror            http://http.debian.net/debian/   "Debian mirror"
+}
+
+# Load configuration
+hydra_provision_load_config
+
+# Parameters
+WORK="/media/mmc"
+CHROOT="hydra_sudo_run chroot $WORK"
+CMDLINE="dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait"
+RPI_URL="http://goo.gl/1BOfJ"
+
+# Get config parameters.
+hydra_provision_config
+
+# Partitioning
+# TODO automated
+hydra_sudo_run cfdisk $device # bootable VFAT (0B) and linux partitions
+hydra_sudo_run mkdir -p $WORK
+
+# Create filesystems
+hydra_sudo_run mkdosfs -F32 "$device"p1
+hydra_sudo_run mkfs.ext4 "$device"p2
+hydra_sudo_run mount "$device"p2 $WORK
+
+# Bootstrap the system
+hydra_sudo_run debootstrap --foreign --arch=$arch $version $WORK
+hydra_sudo_run cp /usr/bin/qemu-arm-static $WORK/usr/bin/
+$CHROOT /debootstrap/debootstrap --second-stage
+
+# Apt configuration
+echo "deb http://http.debian.net/debian/ $version main contrib non-free"      | hydra_sudo_run tee    $WORK/etc/apt/sources.list
+echo "deb http://security.debian.org/ $version/updates main contrib non-free" | hydra_sudo_run tee -a $WORK/etc/apt/sources.list
+
+# Basic packages
+$CHROOT apt-get update
+$CHROOT apt-get install -y locales && $CHROOT dpkg-reconfigure locales
+$CHROOT apt-get install -y screen cron lsb-release openssl openssh-server less ntp
+
+# Hostname
+echo $hostname.$domain | hydra_sudo_run tee $WORK/etc/hostname
+
+# Temporary root password
+$CHROOT passwd
+
+# USB stick support
+$CHROOT apt-get install -y wpasupplicant firmware-ralink # para conexao usando stick usb
+hydra_sudo_run chmod 0600 $WORK/etc/network/interfaces
+
+# Modules
+echo "vchiq"       | hydra_sudo_run tee -a $WORK/etc/modules
+echo "snd_bcm2835" | hydra_sudo_run tee -a $WORK/etc/modules
+
+# Fstab
+echo "Doing a basic network config..."
+cat <<-EOF | hydra_sudo_run tee $WORK/etc/fstab > /dev/null
+proc            /proc           proc    defaults          0       0
+/dev/mmcblk0p1  /boot           vfat    defaults          0       2
+/dev/mmcblk0p2  /               ext4    defaults,noatime  0       1
+EOF
+
+# Inittab
+echo "T0:23:respawn:/sbin/getty -L ttyAMA0 115200 vt100" | hydra_sudo_run tee -a $WORK/etc/inittab
+
+# Networking
+hydra_provision_networking
+
+# Boot setup
+hydra_sudo_run mount "$device"p1 /$WORK/boot/
+echo $CMDLINE | hydra_sudo_run tee $WORK/boot/cmdline.txt
+$CHROOT apt-get install -y git-core binutils ca-certificates
+$CHROOT wget $RPI_URL -O /usr/bin/rpi-update
+$CHROOT chmod +x /usr/bin/rpi-update
+$CHROOT touch /boot/start.elf
+$CHROOT mkdir -p /lib/modules
+$CHROOT rpi-update
+
+# Fingerprints
+hydra_provision_fingerprints
+
+# Teardown
+hydra_sudo_run umount $WORK/boot
+hydra_sudo_run umount $WORK