# Postfix master process configuration file. For details on the format
# of the file, see the master(5) manual page (command: "man 5 master").
#
+# Do not forget to execute "postfix reload" after editing this file.
+#
# ==========================================================================
# service type private unpriv chroot wakeup maxproc command + args
# (yes) (yes) (yes) (never) (100)
<% if smtp_listen == 'all' %>smtp inet n - - - - smtpd
<% else %><%= smtp_listen %>:smtp inet n - - - - smtpd<% end %>
<% if use_submission == 'yes' %>submission inet n - - - - smtpd
- -o smtpd_enforce_tls=yes
+ -o smtpd_tls_security_level=encrypt
-o smtpd_sasl_auth_enable=yes
-o smtpd_client_restrictions=permit_sasl_authenticated,reject
+ -o milter_macro_daemon_name=ORIGINATING
<% end %>
<% if use_smtps == 'yes' %>smtps inet n - - - - smtpd
-o smtpd_tls_wrappermode=yes
-o smtpd_sasl_auth_enable=yes
-o smtpd_client_restrictions=permit_sasl_authenticated,reject
+ -o milter_macro_daemon_name=ORIGINATING
<% end %>
#628 inet n - - - - qmqpd
pickup fifo n - - 60 1 pickup
verify unix - - - - 1 verify
flush unix n - - 1000? 0 flush
proxymap unix - - n - - proxymap
+proxywrite unix - - n - 1 proxymap
smtp unix - - - - - smtp
# When relaying mail as backup MX, disable fallback_relay to avoid MX loops
relay unix - - - - - smtp
- -o fallback_relay=
+ -o smtp_fallback_relay=
# -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
showq unix n - - - - showq
error unix - - - - - error
+retry unix - - - - - error
discard unix - - - - - discard
local unix - n n - - local
virtual unix - n n - - virtual
lmtp unix - - - - - lmtp
anvil unix - - - - 1 anvil
-scache unix - - - - 1 scache
+scache unix - - - - 1 scache
#
# ====================================================================
# Interfaces to non-Postfix software. Be sure to examine the manual
flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
bsmtp unix - n n - - pipe
flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient
-scalemail-backend unix - n n - 2 pipe
+scalemail-backend unix - n n - 2 pipe
flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension}
mailman unix - n n - - pipe
flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
-# file managed by puppet
#
# Postfix master process configuration file. For details on the format
# of the file, see the master(5) manual page (command: "man 5 master").
<% if smtp_listen == 'all' %>smtp inet n - - - - smtpd
<% else %><%= smtp_listen %>:smtp inet n - - - - smtpd<% end %>
<% if use_submission == 'yes' %>submission inet n - - - - smtpd
- -o smtpd_tls_security_level=encrypt
+ -o smtpd_enforce_tls=yes
-o smtpd_sasl_auth_enable=yes
-o smtpd_client_restrictions=permit_sasl_authenticated,reject
- -o milter_macro_daemon_name=ORIGINATING
<% end %>
+#smtp inet n - - - 1 postscreen
+#smtpd pass - - - - - smtpd
+#dnsblog unix - - - - 0 dnsblog
+# -o smtpd_tls_security_level=encrypt
+# -o smtpd_sasl_auth_enable=yes
+# -o smtpd_client_restrictions=permit_sasl_authenticated,reject
+# -o milter_macro_daemon_name=ORIGINATING
<% if use_smtps == 'yes' %>smtps inet n - - - - smtpd
-o smtpd_tls_wrappermode=yes
-o smtpd_sasl_auth_enable=yes
-o smtpd_client_restrictions=permit_sasl_authenticated,reject
-o milter_macro_daemon_name=ORIGINATING
<% end %>
-#628 inet n - - - - qmqpd
+#628 inet n - - - - qmqpd
pickup fifo n - - 60 1 pickup
cleanup unix n - - - 0 cleanup
qmgr fifo n - n 300 1 qmgr
smtp unix - - - - - smtp
# When relaying mail as backup MX, disable fallback_relay to avoid MX loops
relay unix - - - - - smtp
- -o smtp_fallback_relay=
+ -o smtp_fallback_relay=
# -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
showq unix n - - - - showq
error unix - - - - - error
maildrop unix - n n - - pipe
flags=DRhu user=vmail argv=/usr/bin/maildrop -d ${recipient}
#
+# ====================================================================
+#
+# Recent Cyrus versions can use the existing "lmtp" master.cf entry.
+#
+# Specify in cyrus.conf:
+# lmtp cmd="lmtpd -a" listen="localhost:lmtp" proto=tcp4
+#
+# Specify in main.cf one or more of the following:
+# mailbox_transport = lmtp:inet:localhost
+# virtual_transport = lmtp:inet:localhost
+#
+# ====================================================================
+#
+# Cyrus 2.1.5 (Amos Gouaux)
+# Also specify in main.cf: cyrus_destination_recipient_limit=1
+#
+#cyrus unix - n n - - pipe
+# user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user}
+#
+# ====================================================================
+#
# See the Postfix UUCP_README file for configuration details.
#
uucp unix - n n - - pipe
flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
bsmtp unix - n n - - pipe
flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient
-scalemail-backend unix - n n - 2 pipe
+scalemail-backend unix - n n - 2 pipe
flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension}
mailman unix - n n - - pipe
flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
mlmmj unix - n n - - pipe
flags=DORhu user=mlmmj argv=/usr/bin/mlmmj-recieve -F -L /var/spool/mlmmj/$nexthop/
<%- end -%>
+<% if use_firma == 'yes' %>
+firma unix - n n - - pipe
+ flags=DRhu user=firma argv=/var/lib/firma/firma -p ${user}
+firmarequest unix - n n - - pipe
+ flags=DRhu user=firma argv=/var/lib/firma/firma -e ${user}
+<% end %>
<%- unless mastercf_tail.to_s.empty? then -%>
<%= mastercf_tail %>
+++ /dev/null
-#
-# Postfix master process configuration file. For details on the format
-# of the file, see the master(5) manual page (command: "man 5 master").
-#
-# Do not forget to execute "postfix reload" after editing this file.
-#
-# ==========================================================================
-# service type private unpriv chroot wakeup maxproc command + args
-# (yes) (yes) (yes) (never) (100)
-# ==========================================================================
-<% if smtp_listen == 'all' %>smtp inet n - - - - smtpd
-<% else %><%= smtp_listen %>:smtp inet n - - - - smtpd<% end %>
-<% if use_submission == 'yes' %>submission inet n - - - - smtpd
- -o smtpd_enforce_tls=yes
- -o smtpd_sasl_auth_enable=yes
- -o smtpd_client_restrictions=permit_sasl_authenticated,reject
-<% end %>
-#smtp inet n - - - 1 postscreen
-#smtpd pass - - - - - smtpd
-#dnsblog unix - - - - 0 dnsblog
-# -o smtpd_tls_security_level=encrypt
-# -o smtpd_sasl_auth_enable=yes
-# -o smtpd_client_restrictions=permit_sasl_authenticated,reject
-# -o milter_macro_daemon_name=ORIGINATING
-<% if use_smtps == 'yes' %>smtps inet n - - - - smtpd
- -o smtpd_tls_wrappermode=yes
- -o smtpd_sasl_auth_enable=yes
- -o smtpd_client_restrictions=permit_sasl_authenticated,reject
- -o milter_macro_daemon_name=ORIGINATING
-<% end %>
-#628 inet n - - - - qmqpd
-pickup fifo n - - 60 1 pickup
-cleanup unix n - - - 0 cleanup
-qmgr fifo n - n 300 1 qmgr
-#qmgr fifo n - - 300 1 oqmgr
-tlsmgr unix - - - 1000? 1 tlsmgr
-rewrite unix - - - - - trivial-rewrite
-bounce unix - - - - 0 bounce
-defer unix - - - - 0 bounce
-trace unix - - - - 0 bounce
-verify unix - - - - 1 verify
-flush unix n - - 1000? 0 flush
-proxymap unix - - n - - proxymap
-proxywrite unix - - n - 1 proxymap
-smtp unix - - - - - smtp
-# When relaying mail as backup MX, disable fallback_relay to avoid MX loops
-relay unix - - - - - smtp
- -o smtp_fallback_relay=
-# -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
-showq unix n - - - - showq
-error unix - - - - - error
-retry unix - - - - - error
-discard unix - - - - - discard
-local unix - n n - - local
-virtual unix - n n - - virtual
-lmtp unix - - - - - lmtp
-anvil unix - - - - 1 anvil
-scache unix - - - - 1 scache
-#
-# ====================================================================
-# Interfaces to non-Postfix software. Be sure to examine the manual
-# pages of the non-Postfix software to find out what options it wants.
-#
-# Many of the following services use the Postfix pipe(8) delivery
-# agent. See the pipe(8) man page for information about ${recipient}
-# and other message envelope options.
-# ====================================================================
-#
-# maildrop. See the Postfix MAILDROP_README file for details.
-# Also specify in main.cf: maildrop_destination_recipient_limit=1
-#
-maildrop unix - n n - - pipe
- flags=DRhu user=vmail argv=/usr/bin/maildrop -d ${recipient}
-#
-# ====================================================================
-#
-# Recent Cyrus versions can use the existing "lmtp" master.cf entry.
-#
-# Specify in cyrus.conf:
-# lmtp cmd="lmtpd -a" listen="localhost:lmtp" proto=tcp4
-#
-# Specify in main.cf one or more of the following:
-# mailbox_transport = lmtp:inet:localhost
-# virtual_transport = lmtp:inet:localhost
-#
-# ====================================================================
-#
-# Cyrus 2.1.5 (Amos Gouaux)
-# Also specify in main.cf: cyrus_destination_recipient_limit=1
-#
-#cyrus unix - n n - - pipe
-# user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user}
-#
-# ====================================================================
-#
-# See the Postfix UUCP_README file for configuration details.
-#
-uucp unix - n n - - pipe
- flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
-#
-# Other external delivery methods.
-#
-ifmail unix - n n - - pipe
- flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
-bsmtp unix - n n - - pipe
- flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient
-scalemail-backend unix - n n - 2 pipe
- flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension}
-mailman unix - n n - - pipe
- flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
- ${nexthop} ${user}
-<% if use_amavisd == 'yes' %>
-amavis unix - - - - 2 smtp
- -o smtp_data_done_timeout=1200
- -o smtp_send_xforward_command=yes
-
-127.0.0.1:10025 inet n - - - - smtpd
- -o content_filter=
- -o local_recipient_maps=
- -o relay_recipient_maps=
- -o smtpd_restriction_classes=
- -o smtpd_client_restrictions=
- -o smtpd_helo_restrictions=
- -o smtpd_sender_restrictions=
- -o smtpd_recipient_restrictions=permit_mynetworks,reject
- -o mynetworks=127.0.0.0/8
- -o strict_rfc821_envelopes=yes
- -o receive_override_options=no_unknown_recipient_checks,no_header_body_checks
- -o smtpd_bind_address=127.0.0.1
-<% end %>
-<% if use_dovecot_lda == 'yes' %>
-dovecot unix - n n - - pipe
- flags=DRhu user=vmail:vmail argv=/usr/lib/dovecot/deliver -f ${sender} -d ${user}@${nexthop} -n -m ${extension}
-<% end %>
-<% if use_schleuder == 'yes' %>
-schleuder unix - n n - - pipe
- flags=DRhu user=schleuder argv=/usr/bin/schleuder ${user}
-<% end %>
-<% if use_sympa == 'yes' %>
-sympa unix - n n - - pipe
- flags=R user=sympa argv=/usr/lib/sympa/bin/queue ${recipient}
-sympabounce unix - n n - - pipe
- flags=R user=sympa argv=/usr/lib/sympa/bin/bouncequeue ${user}
-<% end %>
-<% if use_mlmmj == 'yes' %>
-mlmmj unix - n n - - pipe
- flags=DORhu user=mlmmj argv=/usr/bin/mlmmj-recieve -F -L /var/spool/mlmmj/$nexthop/
-<%- end -%>
-<% if use_firma == 'yes' %>
-firma unix - n n - - pipe
- flags=DRhu user=firma argv=/var/lib/firma/firma -p ${user}
-firmarequest unix - n n - - pipe
- flags=DRhu user=firma argv=/var/lib/firma/firma -e ${user}
-<% end %>
-
-<%- unless mastercf_tail.to_s.empty? then -%>
-<%= mastercf_tail %>
-<%- end -%>
projects / puppet-postfix.git / commitdiff