Adding apcupsd_pct (commented)

diff --git a/files/munin/apcupsd_pct b/files/munin/apcupsd_pct
new file mode 100644 (file)
index 0000000..65e34ea
--- /dev/null
+++ b/files/munin/apcupsd_pct
@@ -0,0 +1,259 @@
+#!/usr/bin/env perl
+
+use strict;
+use warnings;
+use Carp;
+use Pod::Usage;
+
+our $APCACCESS = $ENV{apcaccess} || "/sbin/apcaccess";
+our $UPS_MODEL = $ENV{ups_model} || "ES 725";
+our $VERSION   = 1.0;
+my  %Graph;
+my  %Metric;
+
+MAIN: {
+    decide_monitor_type();
+
+    my $mode = $ARGV[0] || "fetch";
+    $mode =~ /^-/ && pod2usage();
+
+    ### $mode
+    eval "do_${mode}();"
+        or croak "do_${mode}: $@";
+
+    ### end
+    exit 0;
+}
+
+=begin comment
+
+pct
+  LOADPCT   is the percentage of load capacity as estimated by the UPS.
+    15.0 Percent Load Capacity
+  BCHARGE   is the percentage charge on the batteries.
+    100.0 Percent
+
+volt
+  LINEV     is the current line voltage as returned by the UPS.
+    102.0 Volts
+  BATTV     is the battery voltage as supplied by the UPS.
+    13.5 Volts
+
+time
+  TIMELEFT  is the remaining runtime left on batteries as estimated by the UPS.
+    38.4 Minutes
+
+pwr
+  LOADPCT   is the percentage of load capacity as estimated by the UPS.
+    15.0 Percent Load Capacity
+  NOMPOWER
+    330 Watts
+  LOADMETRIC=LOADPCT/100*NOMPOWER gives realtime power consumption in WATTS
+
+=end comment
+
+=cut
+
+sub decide_monitor_type {
+    my $type = $0 =~ /_pct/  ? "pct"  :
+               $0 =~ /_volt/ ? "volt" :
+               $0 =~ /_time/ ? "time" :
+               $0 =~ /_pwr/  ? "pwr"  : undef
+                   or croak "unknown monitor type: $0";
+
+    # common
+    %Graph = (
+        graph_title => "APC Status".($UPS_MODEL?" ($UPS_MODEL)":"")." - ",
+        graph_category => "ups",
+        graph_info     => "This graph shows information about your APC UPS",
+        graph_args     => "--base 1000 --lower-limit 0",
+       );
+
+    if ($type eq "pct") {
+        $Graph{graph_title}  .= "Percentage";
+        $Graph{graph_vlabel}  = "%";
+        %Metric =(
+            LOADPCT => {
+                label    => "load capacity pct",
+            },
+            BCHARGE => {
+                label    => "charge on the batteries pct",
+            },
+           );
+    } elsif ($type eq "volt") {
+        $Graph{graph_title}  .= "Voltage";
+        $Graph{graph_vlabel}  = "Volts";
+        %Metric =(
+            LINEV => {
+                label    => "line voltage as returned by the UPS",
+            },
+            BATTV => {
+                label    => "battery voltage as supplied by the UPS",
+            },
+           );
+    } elsif ($type eq "time") {
+        $Graph{graph_title} .= "Time";
+        $Graph{graph_vlabel}  = "minutes";
+        %Metric =(
+            TIMELEFT => {
+                label    => "remaining runtime left on batteries",
+            },
+           );
+    } elsif ($type eq "pwr") {
+        $Graph{graph_title} .= "Power";
+        $Graph{graph_vlabel}  = "watts";
+        %Metric =(
+            LOADMETRIC => {
+                label    => "absolute power consumption",
+            },
+           );
+    }
+}
+
+sub do_fetch {
+    ### do_fetch
+
+    my @status_data = retrieve_apcupsd_status()
+        or croak "failed: retrieve_apcupsd_status";
+    ### status_data: \@status_data
+
+    my $status = parse_status_data(@status_data);
+    ### status: $status
+    my $prod_status = proccess_status($status);
+
+    my $FIELD;
+    while (my($field,$attr) = each %Metric) {
+        $field = lc $field;
+        $FIELD = uc $field;
+        printf "%s.value %.1f\n", $field, (exists $status->{$FIELD} ? ($status->{$FIELD} =~ /([\d]+\.?[\d]*)/) : ( exists $prod_status->{$FIELD} ? ( $prod_status->{$FIELD} =~ /([\d]+\.?[\d]*)/) : 0 ) );
+    }
+
+    return 1;
+}
+
+sub do_config {
+    ### do_config
+
+    while (my($k,$v) = each %Graph) {
+        printf "%s %s\n", $k, $v;
+    }
+    while (my($field,$attr) = each %Metric) {
+        $field = lc $field;
+        while (my($k,$v) = each %$attr) {
+            printf "%s.%s %s\n", $field, $k, $v;
+        }
+    }
+
+    return 1;
+}
+
+sub do_autoconf {
+    ### do_config
+    print "yes\n";
+}
+
+sub retrieve_apcupsd_status {
+    open my $apc, '-|', $APCACCESS
+        or croak $!;
+    my @status_data = <$apc>;
+    close $apc;
+    chomp @status_data;
+    return @status_data;
+}
+
+sub proccess_status {
+    my $prod = {};
+    my($status) = @_;
+
+    if (exists $status->{NOMPOWER} && exists $status->{LOADPCT}) {
+        my $pwr_pct = sprintf "%.1f", ($status->{LOADPCT} =~ /([\d]+\.?[\d]*)/) ;
+        my $nom_pwr = sprintf "%.1f", ($status->{NOMPOWER} =~ /([\d]+\.?[\d]*)/) ;
+        $prod->{LOADMETRIC} = $pwr_pct/100 * $nom_pwr ;
+    }
+
+    return $prod;
+}
+
+sub parse_status_data {
+    my $status = {};
+    my($k,$v);
+    for (@_) {
+        ($k,$v) = split /\s*:\s*/, $_, 2;
+        $status->{$k} = $v;
+    }
+    return $status;
+}
+
+
+__END__
+
+=head1 NAME
+
+B<apcupsd_pct>, B<apcupsd_volt>, B<apcupsd_time>, B<apcupsd_pwr>- munin plugin for APC UPS
+
+=head1 SYNOPSIS
+
+B<apcupsd_pct>  [ I<config>|I<fetch> ]
+
+B<apcupsd_volt> [ I<config>|I<fetch> ]
+
+B<apcupsd_time> [ I<config>|I<fetch> ]
+
+B<apcupsd_pwr>  [ I<config>|I<fetch> ]
+
+=head1 DESCRIPTION
+
+munin plugin to monitor APC UPS via apcupsd by apcaccess.
+
+=head1 INSTALLATION
+
+  cp apcupsd_pct $MUNIN_LIBDIR/plugsin/
+  
+  cd YOUR_MUNIN_PLUGINS_DIR
+  (make symbolic links different name)
+  ln -s $MUNIN_LIBDIR/plugsin/apcupsd_pct apcupsd_pct
+  ln -s $MUNIN_LIBDIR/plugsin/apcupsd_pct apcupsd_volt
+  ln -s $MUNIN_LIBDIR/plugsin/apcupsd_pct apcupsd_time
+  ln -s $MUNIN_LIBDIR/plugsin/apcupsd_pwr apcupsd_pwr
+  
+  restart munin-node
+
+=head1 REPOSITORY
+
+L<http://github.com/hirose31/munin-apcupsd>
+
+  git clone git://github.com/hirose31/munin-apcupsd.git
+
+patches and collaborators are welcome.
+
+=head1 SEE ALSO
+
+L<http://exchange.munin-monitoring.org/plugins/apcupsd_pct/details>
+
+L<http://munin.projects.linpro.no/wiki/HowToWritePlugins>,
+L<http://munin.projects.linpro.no/wiki/protocol-config>
+
+=head1 AUTHOR
+
+HIROSE, Masaaki E<lt>hirose31 _at_ gmail.comE<gt>
+
+=head1 CHANGELOG
+
+    * 10/11/2010 - basos - added support for absolute power display
+
+=head1 COPYRIGHT & LICENSE
+
+This program is free software; you can redistribute it and/or modify it
+under the same terms as Perl itself.
+
+=cut
+
+# for Emacsen
+# Local Variables:
+# mode: cperl
+# cperl-indent-level: 4
+# indent-tabs-mode: nil
+# coding: utf-8
+# End:
+
+# vi: set ts=4 sw=4 sts=0 :

diff --git a/manifests/munin.pp b/manifests/munin.pp
index 74f69472bdb91e9ead54d7f02d4c79fc0c043205..46b75bd721767b909eeefc169c6dacafc58cdc56 100644 (file)
--- a/manifests/munin.pp
+++ b/manifests/munin.pp
@@ -11,4 +11,10 @@ class apcupsd::munin(
     source => "apcupsd/munin/apcupsd_ww",
     ensure => absent,
   }
+
+  # From https://raw.githubusercontent.com/munin-monitoring/contrib/master/plugins/ups/apcupsd_pct
+  #munin::plugin::deploy { 'apcupsd_pct':
+  #  source => "apcupsd/munin/apcupsd_pct",
+  #  ensure => $ensure,
+  #}
 }